globe valves

PRODUCT DETAILS SCREWED IN BONNET, INSIDE SCREWED, HAVING RENEWABLE S.S. WORKING PARTS. END DETAILS SCREWED FEMALE ENDS BSP TO BS:21 TESTING HYDRAULIC. BODY TEST PRESSURE :- 500 psig. SEAT TEST PRESSURE :- 300 psig MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 NUT CARBON STEEL BS:916 2 WASHER CARBON STEEL —– 3 HAND WHEEL C.I. BS:1452,Gr.220 4 STEM S.S. AISI:410 5 GLAND NUT BRONZE BS:1400,LG2 6 GLAND BRONZE BS:1400,LG2 7 GLAND PACKING ASBESTOS —– 8 BONNET BRONZE BS:1400,LG2 9 BODY BRONZE BS:1400,LG2 10 SEAT S.S. AISI:410 11 BODY RING S.S. AISI:410 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.

PRODUCT DETAILS SCREWED ON BONNET, INSIDE SCREW, RISING STEM, INTEGRAL SEAT WITH SS(AISI-410) WORKING PARTS. END DETAILS SCREWED FEMALE ENDS BSP TO BS:21 TESTING HYDRAULIC. BODY TEST PRESSURE :- 40Kg/cm2. SEAT TEST PRESSURE :- 30Kg/cm2. MATERIALS OF CONSTRUCTION PART NO. PARTS MATERIALS SPECIFICATION 1 NUT CARBON STEEL BS:916 2 WASHER CARBON STEEL —– 3 HAND WHEEL CAST IRON BS:1452,Gr.220 4 STEM SS AISI-410 5 GLAND NUT SS ASTM A743-CA40 6 GLAND BUSH SS/BRONZE AISI-410/BS:1400 LG2 7 GLAND PACKING GRAPHITED ASBESTOS —– 8 BONNET SS ASTM A743-CA40 9 BODY SS ASTM A743-CA40 10 SEAT SS AISI-410 DIMENSIONS IN mm NOMINAL SIZE ∅A L(+1.5) H~ W~ 15mm 1/2” BSP 70 130 65 20mm 3/4” BSP 80 145 76 25mm 1” BSP 90 160 84 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.

ISI MARKED TO IS:778, CL-I PRODUCT DETAILS SCREWED IN BONNET, INSIDE SCREW, INTEGRAL SEATING RISING STEM & BACK SEAT ARRANGEMENT WITH STURDY HAND WHEEL OPERATED. END DETAILS SCREWED FEMALE ENDS BSP TO BS:21/IS:554 WORKING SUITABLE FOR NON-SHOCK HYDRAULIC LINE TEMP. UP TO 45° C. TESTING HYDRAULIC BODY TEST PRESSURE :- 1.5 Mpa SEAT TEST PRESSURE :- 1.0 Mpa MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 NUT CARBON STEEL BS:916 2 WASHER CARBON STEEL —– 3 HAND WHEEL C.I. BS:1452,Gr.220 4 STEM BRASS BS:2874,CZ114 5 GLAND NUT BRONZE BS:1400,LG2 6 GLAND BUSH BRONZE BS:1400,LG2 7 GLAND PACKING ASBESTOS —– 8 BONNET BRONZE BS:1400,LG2 9 SEAT NUT BRONZE BS:1400,LG2 10 BODY BRONZE BS:1400,LG2 11 SEAT BRONZE BS:1400,LG2 DIMENSIONS IN mm NOMINAL SIZE ∅A L(+1.5) H~ W~ 15mm 1/2” BSP 60 80 55 20mm 3/4” BSP 70 85 60 25mm 1” BSP 80 110 75 32mm 1.1/4” BSP 95 120 85 40mm 1.1/2” BSP 110 132 100 50mm 2” BSP 125 154 110 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.

ISI MARKED TO IS:778, CL-II PRODUCT DETAILS SCREWED IN BONNET, INSIDE SCREW, INTEGRALSEAT, RISING STEM & BACK SEAT ARRANGEMENT WITH STURDY HAND WHEEL. END DETAILS SCREWED FEMALE ENDS BSP TO BS:21 TESTING HYDRAULIC BODY TEST PRESSURE :- 2.4 Mpa SEAT TEST PRESSURE :- 1.6 Mpa MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 NUT CARBON STEEL BS:916 2 WASHER CARBON STEEL —– 3 HAND WHEEL C.I. BS:1452,Gr.220 4 STEM BRASS BS:2874,CZ114 5 GLAND NUT BRONZE BS:1400,LG2 6 GLAND BUSH BRONZE BS:1400,LG2 7 GLAND PACKING ASBESTOS —– 8 BONNET BRONZE BS:1400,LG2 9 SEAT NUT BRONZE BS:1400,LG2 10 BODY BRONZE BS:1400,LG2 11 SEAT BRONZE BS:1400,LG2 DIMENSIONS IN mm NOMINAL SIZE ∅A L(+1.5) H~ W~ 15mm 1/2” BSP 60 80 55 20mm 3/4” BSP 70 85 60 25mm 1” BSP 80 110 75 32mm 1.1/4” BSP 95 120 85 40mm 1.1/2” BSP 110 132 100 50mm 2” BSP 125 154 110 65mm 2.1/2” BSP 160 183 115 80mm 3” BSP 180 218 127 100mm 4” BSP 216 233 160 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.

PRODUCT DETAILS REDUCED BORE ,BOLTED BONNET, OUTSIDE SCREW & YOKE TYPE ,RISING STEM WITH BACKSEAT ARRANGMENT,STAINLESS STEEL (AISI 410) TRIM, HAND WHEEL OPERATED, CONFORMING TO BS:5352 CLASS 800 END DETAILS SCREWED FEMALE NPT THREADS TO ANSI B1.20.1 OR SOCKET WELDED ENDS AS PER ASME B 16.11 WORKING PRESSURE SUITABLE FOR STEAM LINE NOMINAL CONFORMNG TO BS-5160/DIN2401 TESTING HYDRAULIC. BODY – 207 BAR (3000 psig) SEAT & BACK SEAT : – 152 BAR (2200 psig ) MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 NUT FOR HANDWHEEL CARBON STEEL BS:916 2 NAME PLATE ALUMINIUM —– 3 HAND WHEEL CAST IRON BS: 1452 Gr200 4 SPINDLE S.S. AISI-410 5 YOKE BUSH ALLUMINIUM BRONZE BS:1400 AB2C 6 YOKE BUSH LOCKING SCREW CARBON STEEL BS:916 (HIGH TENSILE) 7 EYE BOLTS FORGED CARBON STEEL ASTM A105 8 NUTS FOR EYE BOLTS CARBON STEEL BS:916(HIGH TENSILE) 9 GLAND FLANGED FORGED CARBON STEEL ASTM A105 10 GLAND BUSH S.S. AISI-410 11 GLAND PACKING GRAPHITED ASBESTOS —– 12 WASHER CARBON STEEL —– 13 SCREW CARBON STEEL BS: 916(HIGH TENSILE) 14 HEX. BOLT ALLOY STEEL ASTM A194 Gr.2H/EN8 15 GASKET SPIRAL WOULD S.S. GASKET AISI-304 ASBESTOS FILLED 16 BONNET FORGED CARBON STEEL ASTM A105 17 BODY FORGED CARBON STEEL ASTM A105 18 DISC S.S. AISI-410 19 BODY SEAT RING S.S. AISI-410 DIMENSIONS IN mm NOMINAL SIZE A L+1.5 H~ W~ 15mm 1/2” NPT/SW 90 155 76 20mm 3/4” NPT/SW 95 165 76 25mm 1” NPT/SW 107 175 86 40mm 1.1/2” NPT/SW 130 250 152 50mm 2” NPT/SW 145 225 152 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.

PRODUCT DETAILS SCREWED ON BONNET,INSIDE SCREW ,RISING STEM WITH SS-410 RENEWABLE TRIM. END DETAILS SCREWED FEMALE ENDS BSP TO BS:21 TESTING HYDRAULIC. BODY TEST PRESSURE :- 500psig SEAT TEST PRESSURE :- 350 psig MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 NUT CARBON STEEL BS:916 2 WASHER CARBON STEEL —– 3 HAND WHEEL CAST IRON BS:1452,Gr.220 4 STEM SS AISI-410 5 GLAND NUT BRONZE BS:1400,LG2 6 GLAND BUSH BRONZE BS:1400,LG2 7 GLAND PACKING ASBESTOS —– 8 BONNET BRONZE BS:1400,LG2 9 SEAT NUT BRONZE BS:1400,LG2 10 BODY BRONZE. BS:1400,LG2 11 SEAT SS AISI-410 12 BODY SEAT RING SS AISI-410 DIMENSIONS IN mm NOMINAL SIZE ∅A L(+1.5) H~ W~ 15mm 1/2” BSP 70 133 65 20mm 3/4” BSP 85 149 76 25mm 1” BSP 103 164 84 32mm 1.1/4” BSP 110 179 97 40mm 1.1/2” BSP 122 205 117 50mm 2” BSP 148 214 130 65mm 2.1/2” BSP 180 295 160 80mm 3” BSP 200 305 160 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.

PRODUCT DETAILS RIGHT ANGLE PATTERN, BOLTED BONNET, OUTSIDE SCREW & YOKE TYPE, RISING STEM WITH BACKSEAT ARRANGEMENT, RENEWABLE STAINLESS STEEL(AISI 410)TRIM, HAND OPERATED. END DETAILS LANGED ENDS AS PER BS:4504 PN-40 WORKING PRESSURE SUITABLE FOR STEAM LINE NOMINAL CONFORMNG TO BS-5160/DIN2401 TESTING HYDRAULIC. BODY TESTED :- 76bar (1100psig. hyd.) SEAT TESTED :- 38bar ( 550 psig. hyd. ) MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 NUT CARBON STEEL BS: 916 2 WASHER CARBON STEEL —– 3 HAND WHEEL CAST STEEL BS: 1452 Gr200 4 STEM STAINLESS STEEL AISI-410 5 BONNET CAST STEEL ASTM A216 Gr.WCB 6 GLAND STAINLESS STEEL AISI-410 7 PACKING ASBESTOS GRAPHITED 8 GASKET SPIRAL WOUND ASBESTORS FILLES SS AISI-304 9 DISC NUT STAINLESS STEEL AISI-410 10 DISC STAINLES STEEL AISI-410 11 BODY CAST STEEL ASTM A216 GR.WCB 12 BODY SEAT RING STAINLES STEEL AISI-410 13 YOKE BUSH ALUMINIUM BRONZE BS:1400 AB1C 14 STUD BOLTS & NUTS CARBON STEEL BS:916 15 BACK SEAT BUSH STAINLES STEEL AISI-410 16 GLAND FLANGED CAST STEEL ASTM A216 Gr.WCB DIMENSIONS IN mm NOMINAL SIZE ∅D ∅E ∅F T B L H ∅W 15mm 15 45 95 16 2 90 202 130 20mm 20 58 105 18 2 90 202 140 25mm 25 68 115 18 2 100 215 140 32mm 32 78 140 18 2 105 230 160 40mm 40 88 150 18 3 115 245 180 50mm 50 102 165 20 3 125 260 200 65mm 65 122 185 22 3 145 315 215 80mm 80 138 200 24 3 155 330 250 100mm 100 162 235 24 3 175 365 300 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.

PRODUCT DETAILS SCREWED IN BONNET, INSIDE SCREW & TEFLON SEAT, RISING STEM, SUITABLE FOR TRANSFORMER OIL AND AIR SERVICES. END DETAILS SCREWED FEMALE ENDS BSP TO BS:21 OUTLET :- SCREWED FEMALE BSP TO BS:21 TESTING HYDRAULIC. BODY TEST PRESSURE :- 500 Psig. SEAT TEST PRESSURE :- 300 Psig. MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 NUT CARBON STEEL BS:916 2 WASHER CARBON STEEL ———- 3 HAND WHEEL C.I. BS:1452,Gr.220 4 STEM BRASS BS:2874,CZ114 5 GLAND NUT BRONZE BS:1400,LG2 6 GLAND BUSH BRONZE BS:1400,LG2 7 GLAND PACKING ASBESTOS —– 8 BONNET BRONZE BS:1400,LG2 9 SEAT FACE TEFLON PTFE 10 BODY BRONZE BS:1400,LG2 11 SEAT BRONZE BS:1400,LG2 12 SEAT NUT/WASHER BRASS BS:2874 CZ:114 DIMENSIONS IN mm NOMINAL SIZE ∅A L H~ W~ 15mm 1/2” BSP 52 83 58 20mm 3/4” BSP 68 83 58 25mm 1” BSP 80 112 67 32mm 1.1/4” BSP 90 115 73 40mm 1.1/2” BSP 100 132 85 50mm 2” BSP 127 154 110 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.

PRODUCT DETAILS RIGHT ANGLE PATTERN, BOLTED BONNET, OUTSIDE SCREW & YOKE TYPE, RISING STEM WITH BACKSEAT ARRANGEMENT, RENEWABLE SS(AISI410) WORKING PARTS, HAND WHEEL OPERATED TO RIGHT ANGLED BODY END DETAILS FLANGED TO BS:4504,PN-16 UPTO 150mm OF VALVE FLANGED TO BS:4504,PN-10 ABOVE 150mm OF VALVE WORKING PRESSURE SUITABLE FOR STEAM LINE NOMINAL PRESSURE RATING PN16/10, CONFORMING TO BS:5152, MAX. WORKING TEMP. TESTING HYDRAULIC. TEST PRESSURE :- 26bar (377psig. hyd.) for size uoto 150mm TEST PRESSURE :- 16bar (232 psig. hyd.) for size above 150mm MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 HAND WHEEL CAST IRON BS:1452 Gr.220 2 STEM STAINLESS STEEL AISI-410 3 BONNET CAST IRON BS:1452 Gr.220 4 GLAND CAST IRON BS:1452 Gr.220 5 GLAND PACKING ASBESTOS GRAPHITED —– 6 GASKET C.A.F. —– 7 SEAT NUT BRONZE BS:1400 LG2 8 SEAT STAINLESS STEEL AISI-410 9 BODY RING STAINLESS STEEL AISI-410 10 BODY CAST IRON BS:1452 Gr.220 11 NUT CARBON STEEL BS:916 12 WASHER CARBON STEEL —– 13 LOCKING SCREW CARBON STEEL BS:916 14 YOKE BUSH ALUMINUM BRONZE BS:1400 AB1C 15 STUDS & NUTS CARBON STEEL BS:916 DIMENSIONS IN mm NOMINAL SIZE ∅D ∅E ∅F T B L* H ∅W~ 15mm 15 45 95 14 2 90 150 100 20mm 20 58 105 16 2 95 150 100 25mm 25 68 115 16 2 100 155 100 32mm 32 78 140 18 2 105 185 125 40mm 40 88 150 18 3 115 190 160 50mm 50 102 165 20 3 125 198 160 65mm 65 122 185 20 3 145 242 200 80mm 80 138 200 22 3 155 265 200 100mm 100 158 220 24 3 175 305 250 125mm 125 188 250 26 3 200 370 250 150mm 150 212 285 26 3 225 430 310 200mm 200 268 340 26 3 275 485 400 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTIC

PRODUCT DETAILS BOLTED BONNET, OUTSIDE SCREW & YOKE TYPE, RISING STEM WITH BACKSEAT ARRANGEMENT, RENEWABLE STAINLESS STEEL (AISI 410) TRIM, HAND WHEEL OPERATED. END DETAILS FLANGED TO BS:4504,PN-16 UPTO 150mm OF VALVE FLANGED TO BS:4504,PN-10 ABOVE 150mm OF VALVE WORKING PRESSURE SUITABLE FOR STEAM LINE NOMINAL PRESSURE RATING PN-16/10, CONFORMING TO BS-5152 MAX. WORKING TEMP. 220º (428ºF) TESTING HYDRAULIC. TEST PRESSURE :- 26bar (377psig. hyd.) for size uoto 150mm TEST PRESSURE :- 16bar (232 psig. hyd.) for size above 150mm MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 NUT CARBON STEEL BS:916 2 WASHER CARBON STEEL —– 3 HAND WHEEL CAST IRON BS:1452 Gr.220 4 YOKE BUSH ALUMINIUM BRONZE BS:1400 AB1C 5 LOCKING SCREW CARBON STEEL BS: 916 6 GLAND CAST IRON BS:1452 Gr.220 7 PACKING ASBESTOS GRAPHITED —– 8 BONNET CAST IRON BS:1452 Gr.220 9 DISC NUT BRONZE BS:1400 LG2 10 DISC STAINLESS STEEL AISI-410 11 BODY CAST IRON BS:1452 Gr.220 12 STEM STAINLESS STEEL AISI-410 13 STUD & NUTS CARBON STEEL BS:916 14 GASKET C.A.F —– 15 BODY SEAT RING STAINLESS STEEL AISI-410 NOMINAL SIZE ∅D ∅E ∅F T B L* H ∅W~ 15mm 15 45 95 14 2 130 162 100 20mm 20 58 105 16 2 150 165 100 25mm 25 68 115 16 2 160 175 100 32mm 32 78 140 18 2 180 190 125 40mm 40 88 150 18 3 200 240 160 50mm 50 102 165 20 3 230 255 160 65mm 65 122 185 20 3 290 285 200 80mm 80 138 200 22 3 310 310 200 100mm 100 158 220 24 3 350 350 250 125mm 125 188 250 26 3 400 425 250 150mm 150 212 285 26 3 480 485 310 200mm 200 268 340 26 3 600 590 400 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.

PRODUCT DETAILS SCREWED ON BONNET, INSIDE SCREW, INTEGRAL SEAT WITH TEFLON SEAT FACING AND STURDY HAND WHEEL OPERATED. END DETAILS SCREWED BSP PARALLEL TO BS:21 TESTING HYDRAULIC. BODY TEST PRESSURE :- 500 Psig. SEAT TEST PRESSURE :- 350 Psig. MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 BODY BRONZE BS:1400 LG2 2 BONNET BRONZE BS:1400 LG2 3 GLAND NUT BRONZE BS:1400 LG2 4 GLAND BRONZE BS:1400 LG2 5 DISC NUT & WASHER BRASS BS:2874 CZ-114 6 SPINDLE BRASS/S.S. BS:2874 CZ114/AISI-410 7 SEAT S.S./BRONZE AISI-410/BS:1400 LG2 8 SEAT FACING TEFLON PTFE 9 GLAND PACKING ASBESTOS —– 10 HAND WHEEL CAST IRON BS:1452 Gr.220 11 WASHER CARBON STEEL —– 12 NUT CARBON STEEL BS:916 DIMENSIONS IN mm NOMINAL SIZE ∅D L(+1.5) H (APX) W (APX) 15mm 1/2” BSP 70 133 65 20mm 3/4” BSP 85 149 76 25mm 1” BSP 103 164 84 32mm 1.1/4” BSP 110 179 97 40mm 1.1/2” BSP 120 205 117 50mm 2” BSP 148 214 130 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NO