PRODUCT DETAILS BRONZE GLAND PLUG TYPE WITH TAIL PIPE NIPPLE ON OUTLET END DETAILS INLET:- MALE ENDS BSP TO BS:21 OUTLET:- NOZZLE WITH MALE SERRATED END FOR FLEXIBLE PIPE TESTING HYDRAULIC BODY TEST PRESSURE :- 300 Psig. SEAT TEST PRESSURE :- 200 Psig. MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 BODY BRONZE BS:1400 LG 2 2 GLAND PACKING ASBESTOS —– 3 GLAND NUT BRONZE BS:1400 LG2 4 NOZZLE BRASS BS:2872 CZ114 5 GLAND BUSH BRONZE BS:1400 LG 2 6 PLUG BRONZE BS:1400 LG 2 7 GASKET CAF —– DIMENSIONS IN mm NOMINAL SIZE ∅A ∅B L H (APX) 15mm 1/2” BSP 3/8″BSP 102 60 20mm 3/4” BSP 1/2″BSP 118 68 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.

PRODUCT DETAILS INVERTED BUCKET TYPE, VERTICAL INSTALLABLE, WITH SS-304 WORKING PARTS. END DETAILS SCREWED FEMALE ENDS BSP PARALLEL TO BS:21 TESTING 300 psig. (SHELL TEST) HYDRAULIC. WORKING PRESSURE MAXIMUM B.O.P. 10 Bar MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 PLUG BRONZE BS:1400 LG2 2 COVER CAST IRON BS:1452 Gr220 3 NUT & BOLT CARBON STEEL BS:916 4 VALVE SEAT S.S. AISI-304 5 BALL SEAT S.S. AISI-202 6 E-CLAMP S.S. AISI-304 7 BUCKET S.S. AISI-304 8 BODY CAST IRON BS:1452 Gr220 9 BUCKET RING CAST IRON BS:1452 Gr220 10 HOOK S.S. AISI-304 11 VALVE LEVER S.S. AISI-304 12 GASKET C.A.F. —– 13 BUCKET HOOK S.S. AISI-304 14 SYPHON PIPE MCI BS:10242 DIMENSIONS IN mm NOMINAL SIZE ∅B ∅A L+1.5 15mm 1/2” BSP 1/2” BSP 210 20mm 3/4” BSP 3/4” BSP 210 25mm 1” BSP 1” BSP 275 32mm 1.1/4” BSP 1.1/4” BSP 312 40mm 1.1/2” BSP 1.1/2” BSP 388 50mm 2” BSP 2” BSP 440 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.

PRODUCT DETAILS ACRYLIC CYLINDER WITH HIGH QUALITY SILICA GEL, CAST IRON BODY AND PERFORATED S.S. SCREEN ON BOTH ENDS OF CYLINDER. END DETAILS FEMALE SCREWED ENDS BSP TO BS: 21 WORKING SUITABLE TO DEHYDRATE THE AIR BREATHED IN BY THE PIPE LINE. MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 NUT CARBON STEEL BS:916 2 BODY CAST IRON BS:1452 Gr220 3 STUD CARBON STEEL GALVANISED 4 TRANSPARENT TUBE ACRYLIC … 5 BREATHING MEDIUM SILICA GEL INDICATING GRADE 6 O-RING RUBBER HIGH NITRILE 7 SCREEN STAINLESS STEEL AISI-304 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.

PRODUCT DETAILS SQUARE SECTION PATTERN, RENEWABLE GRAPHITED ASBESTOS SEATING WITH BRONZE PLUG & LEVER OPERATED COMPLETE SET. END DETAILS FLANGE ENDS TO BS:10 TABLE-F TESTING 300 psig. (Hyd.) WORKING PRESSURE SUITABLE FOR STEAM LINE UPTO 150 psig. MAX. WORKING TEMP. 437º F (225º c) MATERIALS OF CONSTRUCTION S. NO. PART’S NAME MATERIALS SPECIFICATIONS 1 PLUG BRONZE BS:1400 LG2 2 GASKET STEAM JOINTING —– 3 SIDE NUT BRONZE BS:1400 LG2 4 GASKET STEAM JOINTING —– 5 UPPER ARM BRONZE BS:1400 LG2 6 PACKING GRAPHITED ASBESTOS —– 7 GLAND BRONZE BS:1400 LG2 8 GLAND NUT BRONZE BS:1400 LG2 9 GLASS TUBE GLASS —– 10 LOWER ARM BRONZE BS:1400 LG2 11 GASKET STEAM JOINTING —– 12 DRAIN COCK BRONZE BS:1400 LG2 13 NUT BRONZE BS:1400 LG2 14 PLUG BRONZE BS:1400 LG2 15 UNION NUT BRONZE BS:1400 LG2 16 TAIL PIPE BRASS BS:2872 CZ114 17 BOTTOM NUT BRONZE BS:1400 LG2 18 BODY SEAT ASBESTOS —–

RODUCT DETAILS END DETAILS SCREWED MALE END BSP TO BS:21 TESTING 300 psig.(Hyd.) WORKING PRESSURE SUITABLE FOR STEAM LINE UPTO 150 psig MAX. WORKING TEMP. 437º F (225º c) MATERIALS OF CONSTRUCTION S. NO. PART’S NAME MATERIALS SPECIFICATIONS 1 PLUG BRONZE BS:1400 LG2 2 GASKET STEAM JOINTING ——— 3 SIDE NUT BRONZE BS:1400 LG2 4 GASKET STEAM JOINTING ———- 5 UPPER ARM BRONZE BS:1400 LG2 6 PACKING GRAPHITED ASBESTOS ———— 7 GLAND BRONZE BS:1400 LG2 8 GLAND NUT BRONZE BS:1400 LG2 9 GLASS TUBE GLASS ———– 10 LOWER ARM BRONZE BS:1400 LG2 11 GASKET STEAM JOINTING ———— 12 DRAIN COCK BRONZE BS:1400 LG2 13 PLUG NUT BRONZE BS:1400 LG2 14 PLUG BRONZE BS:1400 LG2 15 UNION NUT BRONZE BS:1400 LG2 16 TAIL PIPE BRASS BS:2872 CZ114 17 LOCK NUT BRONZE BS:1400 LG2 18 BOTTOM NUT BRONZE BS:1400 LG2

PRODUCT DETAILS SCREWED IN BONNET , INSIDE SCREW, NON RISING STEM, INTEGRAL SEAT & STURDY HAND WHEEL. END DETAILS FLANGED ENDS TO BS:10, TABLE ‘D’ WORKING SUITABLE FOR NON -SHOCK HYDRAULIC LINE TEMP.UPTO 45ºC TESTING (HYD.) BODY TEST PRESSURE :- 300 psig. SEAT TEST PRESSURE :- 200 psig. MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 NUT CARBON STEEL BS:916 2 WASHER CARBON STEEL —– 3 HAND WHEEL CAST IRON BS:1452,Gr220 4 STEM BRASS BS:2872,CZ114 5 GLAND NUT BRONZE BS:1400 LG2 6 GLAND BUSH BRONZE BS:1400 LG2 7 GLAND PACKING ASBESTOS —– 8 BONNET BRONZE BS:1400 LG2 9 WEDGE BRONZE BS:1400 LG2 10 BODY BRONZE BS:1400 LG2 11 STUFFING BOX BRONZE BS:1400 LG2 DIMENSIONS IN mm NOMINAL SIZE ∅B L+1.5 H T ∅D ∅W~ 15mm 15 64 102 6.5 95.3 55 20mm 20 76 115 6.5 101.6 60 25mm 25 86 127 8 114.3 75 32mm 32 89 140 8 120.7 85 40mm 40 106 162 9.5 133.4 100 50mm 50 114 188 9.5 152.4 110 65mm 65 138 220 11 165.1 127 80mm 80 143 249 12.7 184.2 127 100mm 100 179 320 15.8 216 160 125mm 120 230 375 20 254 200 150mm 147 230 425 22 280 210 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOT

ISI MARKED TO IS:778, CL-I PRODUCT DETAILS SCREWED IN BONNET , INSIDE SCREW, NON-RISING STEM ,INTEGRAL SEATING BACK SEAT ARRANGMENT WITH STURDY HAND WHEEL OPERATING. END DETAILS FLANGE ENDS TO BS:4504 PN10/16 OR IS:778 WORKING SUITABLE FOR NON -SHOCK HYDRAULIC LINE TEMP.UPTO 45ºC TESTING (HYD.) BODY TEST PRESSURE :- 1.5 Mpa SEAT TEST PRESSURE :- 1.0 Mpa MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 NUT CARBON STEEL BS:916 2 WASHER CARBON STEEL —– 3 HAND WHEEL CAST IRON BS:1452,Gr200 4 STEM BRASS BS:2872,CZ114 5 GLAND NUT BRONZE BS:1400 LG2 6 GLAND BUSH BRONZE BS:1400 LG2 7 GLAND PACKING ASBESTOS —– 8 STUFFING BOX BRONZEL BS:1400 LG2 9 BONNET BRONZE BS:1400 LG2 10 BODY BRONZE BS:1400,LG2 11 WEDGE BRONZE BS:1400,LG2 DIMENSIONS IN mm NOMINAL SIZE ∅B L+1.5 T ∅D+1.0 H~ ∅W~ 15mm 15 72 6.4 95 102 55 20mm 20 76 6.4 105 115 60 25mm 25 90 8.0 115 129 75 32mm 32 100 8.0 140 140 85 40mm 40 110 9.5 150 162 100 50mm 50 120 11.0 165 188 110 65mm 65 140 13.5 185 220 115 80mm 80 150 13.5 200 249 127 100mm 100 190 16.5 220 320 160 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.

SI MARKED TO IS:778, CL-I PRODUCT DETAILS SCREWED IN BONNET , INSIDE SCREW, NON-RISING STEM, INTEGRAL SEATING, BACK SEAT ARRANGMENT WITH STURDY HAND WHEEL OPERATING. END DETAILS SCREWED FEMALE ENDS BSP TO BS:21/IS:554 WORKING SUITABLE FOR NON -SHOCK HYDRAULIC LINE TEMP.UPTO 45ºC TESTING (HYD.) BODY TEST PRESSURE:- 1.5 Mpa SEAT TEST PRESSURE:- 1.0 Mpa MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 NUT M.S. BS:916 2 WASHER M.S. —– 3 HAND WHEEL CAST IRON BS:1452 Gr220 4 STEM BRASS BS:2872 CZ114 5 GLAND NUT BRONZE BS:1400 LG2 6 GLAND BUSH BRONZE BS:1400 LG2 7 GLAND PACKING ASBESTOS —– 8 STUFFING BOX BRONZE BS:1400 LG2 9 BONNET BRONZE BS:1400 LG2 10 BODY BRONZE BS:1400 LG2 11 WEDGE BRONZE BS:1400 LG2 DIMENSIONS IN mm NOMINAL SIZE A ∅B L H~ ∅W~ 15mm 1/2” BSP 15 60 107 55 20mm 3/4” BSP 20 60 114 60 25mm 1” BSP 25 70 129 75 32mm 1.1/4” BSP 32 80 143 85 40mm 1.1/2” BSP 40 90 164 100 50mm 2” BSP 50 100 191 110 65mm 2.1/2” BSP 65 105 223 115 80mm 3” BSP 80 125 256 127 100mm 4” BSP 100 160 299 158 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.

PRODUCT DETAILS REDUCED BORE, BOLTED BONNET,OUTSIDE SCREW & YOKE TYPE , RISING STEM WITH BACKSEAT ARRANGMENT ,STAINLESS STEEL(AISI 410) TRIM,HAND WHEEL OPERATED,CONFORMING TO BS:5352,CLASS-800 END DETAILS SCREWED FEMALE NPT THREADS TO ANSI B1.20.1 OR SOCKET WELDED ENDS AS PER ASME B16.11 TESTING (HYD.) BODY 207 BAR 3000 psig.HYD. BACK SEAT & SEAT 152 BAR 2200 psig. HYD & 6.9 BAR (100 psig. ) AIR. MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 SLEEVE NUT CARBON STEEL BS: 916 2 WASHER CARBON STEEL —– 3 HAND WHEEL C.I BS: 1452 Gr.200 4 YOKE SLEEVE ALUMINUM BRONZE BS: 1400 AB2C 5 SPINDLE S.S. AISI-410 6 EYE BOLTS FORGED CARBON STEEL ASTM A105 7 NUT FOR GLAND CARBON STEEL (HIGH TENSILE) BS: 916 8 GLAND FLANGED FORGED CARBON STEEL ASTM A105 9 GLAND BUSH S.S AISI-410 10 GLAND PACKING GRAPHITED ASBESTOS —– 11 SCREW CARBON STEEL BS: 916 12 WASHER CARBON STEEL —– 13 HEX. BOLT ALLOY STEEL ASTM A194-Gr2H/EN8 14 BODY FORGED CARBON STEEL ASTM A105 15 BONNET FORGED CARBON STEEL ASTM A105 16 GASKET A.SPIRAL WOUND S.S.FILLED AISI-304 17 WEDGE S.S. AISI-410 18 SEAT RING S.S. AISI-410 DIMENSIONS IN mm NOMINAL SIZE A L W~ H~ 15mm 1/2” NPT/SW 80 76 135 20mm 3/4” NPT/SW 88 76 145 25mm 1” NPT/SW 100 86 170 40mm 1.1/2” NPT/SW 147 120 210 50mm 2” NPT/SW 171 120 240 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.