PRODUCT DETAILS TWO PIECE DESIGN, FULL BORE, TEFLON SEATS & SEAL, S.S.BALL & STEM AND BLOW OFF PROOF STEM WITH LEVER OPERATED END DETAILS FLANGED TO BS-10 TABLE ‘D’ TESTING(HYD.) BODY TEST PRESSURE : 300 psig. SEAT TEST PRESSURE : 300 psig. MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 HANDLE M.S —– 2 STEM NUT CARBON STEEL EN-8 3 GLAND NUT CARBON STEEL EN-8 4 GLAND PACKING TEFLON PTFE 5 STEM SEAL TEFLON PTFE 6 SEAT TEFLON PTFE 7 BALL SS ——– 8 BODY BRONZE BS:1400 LG2 9 STEM S.S. AISI-410 10 CONNECTOR BRONZE BS:1400 LG2 11 BOLT/NUT CARBON STEEL BS: 916 12 SEALING RUBBER NITRILE DIMENSIONS IN mm NOMINAL SIZE ∅A L H~ ∅F T D~ 15mm 13.5 83 74 95.3 6.4 110 20mm 17.5 95 74 101.6 6.4 110 25mm 23.5 105 80 114.3 8.0 132 32mm 29 120 100 120.7 8.0 152 40mm 38 125 110 133.4 9.6 170 50mm 48 157 125 152.4 9..6 210 *65mm 63 172 135 165.1 11.2 250 *80mm 77 210 145 184.2 13.0 327 *100mm 98 238 155 216 16.0 396 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.

PRODUCT DETAILS FULL BORE THREE PIECE DESIGN WITH S.S BALL & STEM, TEFLON SEAT , BLOW OFF PROOF STEM,LEVER OPERATED END DETAILS FLANGED TO BS-10 TABLE ‘F’/E/D OR ANSI CLASS-150 OR BS:4504 PN10/16 TESTING(HYD.) BODY TEST PRESSURE : 300 psig. SEAT TEST PRESSURE : 300 psig. MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 HANDLE CARBON STEEL … 2 TOP NUT CARBON STEEL BS:916 3 GLAND NUT CARBON STEEL BS:916 4 GLAND PACKING TEFLON PTFE 5 STEM S.S AISI-410 6 STEM SEAL TEFLON PTFE 7 SEATS TEFLON PTFE 8 BALL S.S. —— 9 CONNECTOR C.I. BS:1452 GR220 10 SEALINGS RUBBER NITRILE 11 BODY C.I.. BS:1452 GR220 12 NUT/ STUD CARBON STEEL BS:916 DIMENSIONS IN mm NOMINAL SIZE ∅B L H~ ∅F ∅G T D~ 15mm 14 128 80 89 35 11.2 110 20mm 17 130 80 98.5 43 11.2 110 25mm 23.5 140 85 108 51 11.2 132 32mm 30 165 110 117.5 62.5 12.7 152 40mm 37 165 115 127 73 14.2 170 50mm 49 203 125 152.5 92.5 15.8 210 65mm 63 223 145 178 105 17.5 250 80mm 78 241 180 190.5 127 19.0 327 100mm 98 310 225 229 157 24.0 396 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.

PRODUCT DETAILS FULL BORE, TWO PIECE DESIGN WITH STAINLESS STEEL BALL & BLOW OFF PROOF STEM, TEFLON SEAT & SEAL, LEVER OPERATED. END DETAILS SCREWED FEMALE ENDS BSP TO BS:21 TESTING HYDRAULIC. BODY TEST PRESSURE :- 500 psig SEAT TEST PRESSURE :- 500 psig MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 LEVER CARBON STEEL —– 2 NUT CARBON STEEL BS:916 3 GLAND NUT CARBON STEEL BS:916 4 GLAND PACKING TEFLON PTFE 5 STEM SEAL TEFLON PTFE 6 SEAT TEFLON PTFE 7 BALL S.S. —– 8 BODY CAST IRON BS:1452 Gr.220 9 STEM S.S. AISI-410 10 CONNECTOR CAST IRON BS:1452 Gr.220 DIMENSIONS IN mm NOMINAL SIZE ∅A L+1.5 H1~ D~ 15mm 1/2” BSP 84 62 110 20mm 3/4” BSP 90 68 110 25mm 1”BSP 95 68 132 32mm 1.1/4”BSP 107 100 150 40mm 1.1/2” BSP 120 110 170 50mm 2” BSP 143 115 200 65mm 2.1/2”BSP 160 145 250 80mm 3”BSP 180 150 320 100mm 4”BSP 228 220 400 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.

PRODUCT DETAILS WO PIECE DESIGN WITH STAINLESS STEEL BALL & BLOW OFF PROOF STEM, TEFLON SEAT & SEAL, LEVER OPERATED. END DETAILS:- SCREWED FEMALE ENDS BSP TO BS:21 TESTING (HYD.) BODY TEST PRESSURE : 300 psig SEAT TEST PRESSURE : 300 psig MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 Lever Carbon Steel —– 2 Nut Carbon Steel BS-916 3 Gland Nut Carbon Steel BS-916 4 Gland Packing Teflon PTFE 5 Stem Seal Teflon PTFE 6 Seat Teflon PTFE 7 Ball S.S. —– 8 Body BRONZE BS: 1400 LG2 9 Stem S.S. AISI-410 10 Connector BRONZE BS: 1400 LG2 11 Sleeve PVC —— DIMENSIONS IN mm NOMINAL SIZE ∅A B L H~ D~ 15mm 14 1/2” BSP 68 65 100 20mm 19 3/4” BSP 75 65 115 25mm 25 1” BSP 83 75 132 32mm 32 1-1/4” BSP 97 100 150 40mm 38 1-1/2” BSP 107 100 170 50mm 48 2” BSP 122 110 215 65mm 63 2-1/2” BSP 148 165 250 80mm 77 3” BSP 164 175 327 100mm 97 4” BSP 214 230 405 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.

PRODUCT DETAILS FLAP TYPE DOUBLE DISC , SPRING LOADED SWING TYPE CHECK VALVE BODY SEAT FACING NITRILE MOULDED LINER DISC SEAT FACING S.S./ SGI INTEGRAL FACE END DETAILS SUITABLE FOR INSERTION BETWEEN CLASS-150,BS-10 TABLE D/E , BS:4504,PN:10/16 FLANGES PRESSURE RATING PN-16 ( HYDRAULIC) TESTING (HYD.) BODY – 500 psig. SEAT – 250 psig. MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 BODY CAST IRON BS:1452 Gr.220 2 DISC S.S./ S.G.I. AISI 304 / BS:2789 3 SEAT RING RUBBER NITRILE 4 SPRING S.S AISI 304 5 HINGE PIN S.S AISI 304 6 STOP PIN S.S AISI 304 7 BEARING TEFLON P.T.F.E. 8 PLUG/GRUB SCREW CARBON STEEL BS: 916 9 NAME PLATE ALUMINIUM … NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.

PRODUCT DETAILS SINGLE FLAP DISC , SWING TYPE CHECK VALVE BODY SEAT FACING NITRILE MOULDED LINER END DETAILS WAFER SHORT ENDS WITH INTEGRALLY MOULDED RUBBER GASKET. SUITABLE FOR INSERTION BETWEEN CLASS-150,BS-10 TABLE ‘D’ & ‘E’ ,BS:4504,PN-10/16 FLANGES. PRESSURE RATING PN-16 ( HYDRAULIC) TESTING (HYD.) BODY – 500 psig. SEAT – 250 psig. MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 HOOK M.S. — 2 BODY S.G.I BS:2789 3 DISC S.G.I / S.S. BS:2789 / AISI 304 4 BODY SEAT RUBBER NITRILE 5 O RING RUBBER HIGH NITRILE 6 CSK BOLTS CARBON STEEL BS: 916 DIMENSIONS IN mm NOMINAL SIZE ∅A B+2 40mm 86 16 50mm 97 16 65mm 110 16 80mm 129 16 100mm 160 16 125mm 192 18 150mm 218 21 200mm 272 22 250mm 330 28 300mm 384 30 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.

PRODUCT DETAILS RIGHT ANGLE PATTERN, BOLTED COVER, RENEWABLE STAINLESS STEEL TRIM. END DETAILS FLANGED TO DIN 2533 RF, PN16 FOR SIZE UP TO 150mm FLANGED TO DIN 2532 RF, PN10 FOR SIZE 200mm WORKING PRESSURE SUITABLE FOR STEAM LINE NOMINAL PRESSURE RATING PN-16/10, CONFORMING TO BS:5153 TESTING HYDRAULIC. TEST PRESSURE:- 26Bar (377 psig. hyd.) For size up to 150mm TEST PRESSURE:- 16Bar ( 232 psig. hyd. ) For size above 150mm MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 STUDS AND NUTS CARBON STEEL BS: 916 2 COVER CAST IRON BS:1452 GR.220 3 GASKET C.A.F. … 4 DISC STAINLESS STEEL AISI-410 5 BODY SEAT RING STAINLESS STEEL AISI-410 6 BODY CAST IRON BS:1452 GR.220 DIMENSIONS IN mm NOMINAL SIZE ∅D ∅E ∅F T B L* H~ 15mm 15 45 95 14 2 90 60 20mm 20 58 105 16 2 95 60 25mm 25 68 115 16 2 100 68 32mm 32 78 140 18 2 105 70 40mm 40 88 150 18 3 115 75 50mm 50 102 165 20 3 125 80 65mm 65 122 185 20 3 145 96 80mm 80 138 200 22 3 155 102 100mm 100 158 220 24 3 175 112 125mm 125 188 250 26 3 200 128 150mm 150 212 285 26 3 225 148 200mm 200 268 340 26 3 275 178 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE

PRODUCT DETAILS BOLTED COVER, RENEWABLE STAINLESS STEEL(AISI 410)TRIM. END DETAILS FLANGED TO BS:4504,PN-16 UPTO 150mm OF VALVE FLANGED TO BS:4504,PN-10 ABOVE 150mm OF VALVE WORKING PRESSURE SUITABLE FOR STEAM LINE NOMINAL PRESSURE RATING PN-16/10, CONFORMING TO BS:5153 TESTING HYDRAULIC. TEST PRESSURE :- 26Bar (377psig.) For size up to 150mm TEST PRESSURE :- 16Bar (232 psig.) For size above 150mm MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 STUDS AND NUTS CARBON STEEL BS: 916 2 COVER CAST IRON BS:1452 GR.220 3 GASKET C.A.F. … 4 DISC STAINLESS STEEL AISI-410 5 BODY SEAT RING STAINLESS STEEL AISI-410 6 BODY CAST IRON BS:1452 GR.220 DIMENSIONS IN mm NOMINAL SIZE ∅D ∅E ∅F T B L* H~ 15mm 15 45 95 14 2 130 70 20mm 20 58 105 16 2 150 70 25mm 25 68 115 16 2 160 80 32mm 32 78 140 18 2 180 95 40mm 40 88 150 18 3 200 100 50mm 50 102 165 20 3 230 108 65mm 65 122 185 20 3 290 130 80mm 80 138 200 22 3 310 144 100mm 100 158 220 24 3 350 158 125mm 125 188 250 26 3 480 218 150mm 150 212 285 26 3 480 218 200mm 200 268 340 26 3 600 260 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.

PRODUCT DETAILS RACK & PINION OPERATED WITH RENEWABLE SS WORKING PARTS AND TIGHT SHUT OFF TYPE. END DETAILS FLANGED ENDS TO BS-10 TABLE ‘H’ WORKING SUITABLE FOR STEAM UP TO 250 Psig. TESTING 500 psig.HYDRAULIC. MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 BONNET BRONZE BS:1400,LG2 2 RACK BRONZE BS:1400,LG2 3 STUDS & NUTS CARBON STEEL BS: 916 4 BODY BRONZE BS:1400,LG2 5 GASKET CAF STEAM JOINT 6 BODY SEAT RING S.S. AISI-410 7 MALE DISC S.S. AISI-410 8 FEMALE DISC S.S. AISI-410 9 SPRING S.S. AISI-304 10 PINION BRONZE BS:1400,LG2 11 GLAND BRONZE BS:1400,LG2 12 PACKING CAF STEAM JOINT 13 STUFFING BOX BRONZE BS:1400,LG2 DIMENSIONS IN mm NOMINAL SIZE NB D L+1.5 T H 25mm 25 121 169 14 150 40mm 38 140 190 18 205 50mm 46 165 206 20 206 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.