PRODUCT DETAILS REDUCED BORE, BOLTED BONNET,OUTSIDE SCREW & YOKE TYPE , RISING STEM WITH BACKSEAT ARRANGMENT ,STAINLESS STEEL(AISI 410) TRIM,HAND WHEEL OPERATED,CONFORMING TO BS:5352,CLASS-800 END DETAILS SCREWED FEMALE NPT THREADS TO ANSI B1.20.1 OR SOCKET WELDED ENDS AS PER ASME B16.11 TESTING (HYD.) BODY 207 BAR 3000 psig.HYD. BACK SEAT & SEAT 152 BAR 2200 psig. HYD & 6.9 BAR (100 psig. ) AIR. MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 SLEEVE NUT CARBON STEEL BS: 916 2 WASHER CARBON STEEL —– 3 HAND WHEEL C.I BS: 1452 Gr.200 4 YOKE SLEEVE ALUMINUM BRONZE BS: 1400 AB2C 5 SPINDLE S.S. AISI-410 6 EYE BOLTS FORGED CARBON STEEL ASTM A105 7 NUT FOR GLAND CARBON STEEL (HIGH TENSILE) BS: 916 8 GLAND FLANGED FORGED CARBON STEEL ASTM A105 9 GLAND BUSH S.S AISI-410 10 GLAND PACKING GRAPHITED ASBESTOS —– 11 SCREW CARBON STEEL BS: 916 12 WASHER CARBON STEEL —– 13 HEX. BOLT ALLOY STEEL ASTM A194-Gr2H/EN8 14 BODY FORGED CARBON STEEL ASTM A105 15 BONNET FORGED CARBON STEEL ASTM A105 16 GASKET A.SPIRAL WOUND S.S.FILLED AISI-304 17 WEDGE S.S. AISI-410 18 SEAT RING S.S. AISI-410 DIMENSIONS IN mm NOMINAL SIZE A L W~ H~ 15mm 1/2” NPT/SW 80 76 135 20mm 3/4” NPT/SW 88 76 145 25mm 1” NPT/SW 100 86 170 40mm 1.1/2” NPT/SW 147 120 210 50mm 2” NPT/SW 171 120 240 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.

PRODUCT DETAILS BOLTED BONNET,OUTSIDE SCREW & YOKE TYPE,RISING STEM WITH BACK SEAT ARRANGEMENT,RENWABLE S.S./MONEL TRIM, WITH STRAIGHT INLET HAND WHEEL OPERATED END DETAILS FLANGED ENDS AS PER BS:10 TABLE ‘J’ WORKING PRESSURE TESTING 700 psig.(Hyd.) MATERIALS OF CONSTRUCTION S NO. PART’S NAME MATERIALS SPECIFICATIONS 1 NUT CARBON STEEL BS:916 2 WASHER CARBON STEEL … 3 HAND WHEEL C.I. BS:1452 Gr220 4 STEM S.S. AISI-410 5 LOCKING SCREW CARBON STEEL BS:916 6 YOKE BUSH ALUMINIUM BRZ. BS:1400 AB1C 7 STUD & NUT CARBON STEEL BS:916 8 GLAND FLANGE CAST STEEL ASTM A216 Gr.WCB 9 GLAND S.S. AISI-410 10 BONNET CAST STEEL ASTM A216 Gr.WCB 11 GLAND PACKING GRAPHITED ASBESTOS … 12 STUDS & NUTS CARBON STEEL BS:916 13 BACK SEAT BUSH S.S. AISI-410 14 GASKET STEAM JOINTING … 15 DISC NUT S.S. AISI-410 16 DISC S.S. AISI-410 17 BODY SEAT RING S.S. AISI-410 18 GUIDE S.S. AISI-410 19 BODY CAST STEEL ASTM A216 Gr.WCB 20 CHECK VALVE DISC S.S. AISI-410 21 STUDS & NUTS CARBON STEEL BS:916 22 STRAIGHT INLET CAST STEEL ASTM A216 Gr.WCB DIMENSIONS IN mm NOMINAL SIZE ∅F L+1.5 T H1~ H2~ 25mm 120.6 100 13 220 155 40mm 133.3 105 16 240 185 50mm 139.7 110 16 260 190 65mm 165.1 125 20 280 195 80mm 368.3 145 20 320 240 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.

PRODUCT DETAILS BOLTED BONNET,OUTSIDE SCREW & YOKE TYPE, RISING STEM, STRAIGHT INLET, RENEWABLE TRIMS, BACKSEAT ARRANGEMENT WITH HANDWHEEL OPERATED. END DETAILS FLANGED ENDS AS PER BS:10 TABLE ‘F’ WORKING PRESSURE SUITABLE MAX. BOP 150 psig.MAX.WORKING TESTING 300 psig. (Hyd.) MATERIALS OF CONSTRUCTION S NO. PART’S NAME MATERIALS SPECIFICATIONS 1 NUT CARBON STEEL BS:916 2 WASHER CARBON STEEL … 3 HAND WHEEL C.I. BS:1452 Gr220 4 STEM S.S. AISI-410 5 BUSH S.S. AISI-410 6 GLAND C.I. BS:1452 Gr220 7 GLAND PACKING ASBESTOS … 8 BONNET C.I. BS:1452 Gr220 9 GASKET CAF … 10 DISC NUT S.S. AISI-410 11 SCREW S.S. AISI-410 12 DISC S.S. AISI-410 13 BODY SEAT RING S.S. AISI-410 14 BODY C.I. BS:1452 Gr220 15 STUD & NUT CARBON STEEL BS:916 16 T-HEAD BOLT & NUT CARBON STEEL BS:916 17 STOPPER BRONZE BS:1400 LG2 18 GASKET CAF … 19 CHECK DISC S.S. AISI-410 20 STRAIGHT INLET C.I. BS:1452 Gr220 DIMENSIONS IN mm NOMINAL SIZE ∅A ∅B L+1 T H1~ H2~ 25mm 25 122 100 13 220 155 32mm 32 134 105 16 240 185 40mm 40 140 110 16 260 190 50mm 50 165 125 20 280 195 65mm 65 184 145 20 310 240 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.

PRODUCT DETAILS ANGLE TYPE WITH SS(AISI-410)/ MONEL SEAT AND SS STEM. END DETAILS INLET-FLANGED TO BS:10 TABLE ‘F’ OUTLET-FLANGED TO BS:10 TABLE ‘D’ WORKING MAX BOP 150psig AND MAX WORKING TEMP 220° C TESTING (HYD.) 370 Psig. HYDRAULIC. MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 CAP C.I. BS:1452 Gr220 2 COTTER BRONZE BS:1400 LG2 3 LEVER C.I. BS:1452 Gr220 4 LOCKING NUT BRONZE BS:1400 LG2 5 COVER C.I. BS:1452 Gr220 6 BUSH BRONZE BS:1400 LG2 7 ADJUSTING SCREW BRONZE BS:1400 LG2 8 UPPER SPRING DISC C.I. BS:1452 Gr220 9 SPRING CHAMBER C.I. BS:1452 Gr220 10 STEM S.S. AISI-410 11 LOWER SPRING DISC C.I. BS:1452 Gr220 12 BUSH BRONZE BS:1400 LG2 13 GASKET CAF —————- 14 SPRING SPRING STEEL BS: 1726 EN47 15 GASKET CAF —————- 16 DISC S.S. AISI-410 17 DISC NUT BRONZE BS:1400 LG2 18 SCREW AND NUT BRASS BS: 2874 CZ114 19 BODY SEAT RING S.S. AISI-410 20 BODY C.I. BS:1452 Gr220 21 REGULATING RING BRONZE BS:1400 LG2 22 BOLTS AND NUTS CARBON STEEL BS:936 23 STUDS AND NUTS CARBON STEEL BS:936 DIMENSIONS IN mm NOMINAL SIZE ∅A B T ∅D L H~ 25MM 25 108 12.7 120.6 89 455 40MM 38 120.6 15.8 139.7 101.6 525 50MM 50 137.5 137.5 165.1 120.6 580 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.

PRODUCT DETAILS SPRING LOADED,INTEGRAL SEATING & ENCLOSED DISCHARGE TYPE END DETAILS SCREWED MALE INLET BSP TO BS:21, SCREWED FEMALE OUTLET BSP TO BS:21 TESTING 20 psig TO 150 psig HYDRAULIC SET PRESSURE 50 psig MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 ADJUSTING SCREW BRONZE BS:1400 LG2 2 CHECK NUT BRONZE BS:1400 LG2 3 CHAMBER BRONZE BS:1400 LG2 4 UPPER SPRING DISC BRONZE BS:1400 LG2 5 SPRING SPRING STEEL EN:47 6 STEM BRONZE BS:1400 LG2 7 SEAT BRONZE BS:1400 LG2 8 BODY BRONZE BS:1400 LG2 DIMENSIONS IN mm NOMINAL SIZE A & B C ~ D~ H~ 15mm 1/2” BSP 43 60 132 20mm 3/4” BSP 45 60 136 25mm 1” BSP 52 63 165 32mm 1.1/4” BSP … … 170 40mm 1.1/2” BSP 63 80 215 50mm 2” BSP 63 82 225 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.

PRODUCT DETAILS SPRING LOADED INTEGRAL SEATING & OPEN DISCHARGE TYPE. END DETAILS FLANGED INLET TO BS:4504 (PN-10/16) TESTING 20 Psig. TO 150 Psig. HYDRAULIC. SET PRESSURE 50 Psig. MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 BODY BRONZE BS:1400 LG2 2 SEAT BRONZE BS:1400 LG2 3 CHAMBER BRONZE BS:1400 LG2 4 STEM BRONZE BS:1400 LG2 5 SPRING SPRING STEEL EN-47 6 SPRING DISC BRONZE BS:1400 LG2 7 CHECK NUT BRONZE BS:1400 LG2 8 ADJUSTING SCREW BRONZE BS:1400 LG2 MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 BODY BRONZE BS:1400 LG2 2 SEAT BRONZE BS:1400 LG2 3 CHAMBER BRONZE BS:1400 LG2 4 STEM BRONZE BS:1400 LG2 5 SPRING SPRING STEEL EN-47 6 SPRING DISC BRONZE BS:1400 LG2 7 CHECK NUT BRONZE BS:1400 LG2 8 ADJUSTING SCREW BRONZE BS:1400 LG2 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.

PRODUCT DETAILS SPRING LOADED,INTEGRAL SEATING & OPEN DISCHARGE TYPE. END DETAILS MALE INLET BSP THREADS TO BS:21 TESTING 20 TO 150 Psig. HYDRAULIC. SET PRESSURE 50psig. MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 ADJUSTING SCREW BRONZE BS:1400 LG2 2 CHECK NUT BRONZE BS:1400 LG2 3 CHAMBER BRONZE BS:1400 LG2 4 UPPER SPRING DISC BRONZE BS:1400 LG2 5 SPRING SPRING STEEL EN:47 6 STEM BRONZE BS:1400 LG2 7 SEAT BRONZE BS:1400 LG2 8 BODY BRONZE BS:1400 LG2 DIMENSIONS IN mm NOMINAL SIZE A H~ 15mm 1/2” BSP 126 20mm 3/4” BSP 133 25mm 1” BSP 170 32mm 1.1/4” BSP 170 40mm 1.1/2” BSP 208 50mm 2” BSP 225 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.

PRODUCT DETAILS INVERTED BUCKET TYPE, VERTICAL INSTALLABLE, WITH SS-304 WORKING PARTS. END DETAILS SCREWED FEMALE ENDS BSP PARALLEL TO BS:21 TESTING 300 psig. (SHELL TEST) HYDRAULIC. WORKING PRESSURE MAXIMUM B.O.P. 10 Bar MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 PLUG BRONZE BS:1400 LG2 2 COVER CAST IRON BS:1452 Gr220 3 NUT & BOLT CARBON STEEL BS:916 4 VALVE SEAT S.S. AISI-304 5 BALL SEAT S.S. AISI-202 6 E-CLAMP S.S. AISI-304 7 BUCKET S.S. AISI-304 8 BODY CAST IRON BS:1452 Gr220 9 BUCKET RING CAST IRON BS:1452 Gr220 10 HOOK S.S. AISI-304 11 VALVE LEVER S.S. AISI-304 12 GASKET C.A.F. —– 13 BUCKET HOOK S.S. AISI-304 14 SYPHON PIPE MCI BS:10242 DIMENSIONS IN mm NOMINAL SIZE ∅B ∅A L+1.5 15mm 1/2” BSP 1/2” BSP 210 20mm 3/4” BSP 3/4” BSP 210 25mm 1” BSP 1” BSP 275 32mm 1.1/4” BSP 1.1/4” BSP 312 40mm 1.1/2” BSP 1.1/2” BSP 388 50mm 2” BSP 2” BSP 440 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.

PRODUCT DETAILS REDUCED BORE ,BOLTED BONNET, OUTSIDE SCREW & YOKE TYPE ,RISING STEM WITH BACKSEAT ARRANGMENT,STAINLESS STEEL (AISI 410) TRIM, HAND WHEEL OPERATED, CONFORMING TO BS:5352 CLASS 800 END DETAILS SCREWED FEMALE NPT THREADS TO ANSI B1.20.1 OR SOCKET WELDED ENDS AS PER ASME B 16.11 WORKING PRESSURE SUITABLE FOR STEAM LINE NOMINAL CONFORMNG TO BS-5160/DIN2401 TESTING HYDRAULIC. BODY – 207 BAR (3000 psig) SEAT & BACK SEAT : – 152 BAR (2200 psig ) MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 NUT FOR HANDWHEEL CARBON STEEL BS:916 2 NAME PLATE ALUMINIUM —– 3 HAND WHEEL CAST IRON BS: 1452 Gr200 4 SPINDLE S.S. AISI-410 5 YOKE BUSH ALLUMINIUM BRONZE BS:1400 AB2C 6 YOKE BUSH LOCKING SCREW CARBON STEEL BS:916 (HIGH TENSILE) 7 EYE BOLTS FORGED CARBON STEEL ASTM A105 8 NUTS FOR EYE BOLTS CARBON STEEL BS:916(HIGH TENSILE) 9 GLAND FLANGED FORGED CARBON STEEL ASTM A105 10 GLAND BUSH S.S. AISI-410 11 GLAND PACKING GRAPHITED ASBESTOS —– 12 WASHER CARBON STEEL —– 13 SCREW CARBON STEEL BS: 916(HIGH TENSILE) 14 HEX. BOLT ALLOY STEEL ASTM A194 Gr.2H/EN8 15 GASKET SPIRAL WOULD S.S. GASKET AISI-304 ASBESTOS FILLED 16 BONNET FORGED CARBON STEEL ASTM A105 17 BODY FORGED CARBON STEEL ASTM A105 18 DISC S.S. AISI-410 19 BODY SEAT RING S.S. AISI-410 DIMENSIONS IN mm NOMINAL SIZE A L+1.5 H~ W~ 15mm 1/2” NPT/SW 90 155 76 20mm 3/4” NPT/SW 95 165 76 25mm 1” NPT/SW 107 175 86 40mm 1.1/2” NPT/SW 130 250 152 50mm 2” NPT/SW 145 225 152 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.