PRODUCT DETAILS TANK MOUNTING WITH CAP & LOCKING ARRANGEMENT END DETAILS OUTLET :- FEMALE BSP AS TO BS:21 INLET :- MALE BSP AS TO BS:21 WORKING SUITABLE TO FILL THE OIL TANK THROUGH HOLE UNDER LOCKABLE CAP MATERIALS OF CONSTRUCTION S. NO. PART’S NAME MATERIALS SPECIFICATIONS 1 BODY CAST IRON BS:1452 Gr.220 2 LOCKING STRIPS CARBON STEEL —– 3 CAP CAST IRON BS:1452 Gr.220 4 SEAL RUBBER NITRILE 5 RIVET CARBON STEEL —– DIMENSIONS IN mm NOMINAL SIZE ∅A ∅B H~ 65mm 2.1/2″BSP 2.1/2″BSP 90 80mm 3″BSP 3″BSP 90 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.

PRODUCT DETAILS TANK MOUNsTING WITH CAP & LOCKING ARRANGEMENT END DETAILS MOUNTING THREADS BSP TO BS:21 WORKING SUITABLE FOR FLUID TANKS TO CHECK THE LEVEL OF TANK BY INSERTING DIP SCALE/GAUGE THROUGH GAUGE HOLE UNDER THE LOCKABLE CAP MATERIALS OF CONSTRUCTION S. NO. PART’S NAME MATERIALS SPECIFICATIONS 1 BODY CAST IRON BS:1452 Gr.220 2 LOCKING STRIPS CARBON STEEL —– 3 CAP CAST IRON BS:1452 Gr.220 4 SEAL RUBBER NITRILE 5 RIVET CARBON STEEL —– DIMENSIONS IN mm NOMINAL SIZE ∅A H~ 40mm 1.1/2″BSP 63 50mm 2″BSP 63

PRODUCT DETAILS SCREWED ON COVER WITH RENEWABLE S.S. WORKING PARTS END DETAILS SCREWED FEMALE ENDS BSP TO BS:21 TESTING (HYD.) BODY TEST PRESSURE :-500 psig. SEAT TEST PRESSURE :- 300psig. MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 BODY BRONZE BS:1400 LG2 2 VALVE DISC S.S. AISI-410 3 BODY SEAT RING S.S. AISI-410 4 BONNET BRONZE BS:1400 LG2 DIMENSIONS IN mm NOMINAL SIZE A L(+1.5) H~ 15mm 1/2”BSP 70 41 20mm 3/4”BSP 85 47 25mm 1”BSP 102 57 32mm 1.1/4”BSP 110 61.5 40mm 1.1/2”BSP 122 62.5 50mm 2”BSP 148 79.5 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.

PRODUCT DETAILS ANGLE TYPE WITH SS(AISI-410)/ MONEL SEAT AND SS STEM. END DETAILS INLET-FLANGED TO BS:10 TABLE ‘F’ OUTLET-FLANGED TO BS:10 TABLE ‘D’ WORKING MAX BOP 150psig AND MAX WORKING TEMP 220° C TESTING (HYD.) 370 Psig. HYDRAULIC. MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 CAP C.I. BS:1452 Gr220 2 COTTER BRONZE BS:1400 LG2 3 LEVER C.I. BS:1452 Gr220 4 LOCKING NUT BRONZE BS:1400 LG2 5 COVER C.I. BS:1452 Gr220 6 BUSH BRONZE BS:1400 LG2 7 ADJUSTING SCREW BRONZE BS:1400 LG2 8 UPPER SPRING DISC C.I. BS:1452 Gr220 9 SPRING CHAMBER C.I. BS:1452 Gr220 10 STEM S.S. AISI-410 11 LOWER SPRING DISC C.I. BS:1452 Gr220 12 BUSH BRONZE BS:1400 LG2 13 GASKET CAF —————- 14 SPRING SPRING STEEL BS: 1726 EN47 15 GASKET CAF —————- 16 DISC S.S. AISI-410 17 DISC NUT BRONZE BS:1400 LG2 18 SCREW AND NUT BRASS BS: 2874 CZ114 19 BODY SEAT RING S.S. AISI-410 20 BODY C.I. BS:1452 Gr220 21 REGULATING RING BRONZE BS:1400 LG2 22 BOLTS AND NUTS CARBON STEEL BS:936 23 STUDS AND NUTS CARBON STEEL BS:936 DIMENSIONS IN mm NOMINAL SIZE ∅A B T ∅D L H~ 25MM 25 108 12.7 120.6 89 455 40MM 38 120.6 15.8 139.7 101.6 525 50MM 50 137.5 137.5 165.1 120.6 580 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.

PRODUCT DETAILS HIGH LIFT, INTEGRAL SEAT TYPE. END DETAILS FLANGED TO BS:10 TABLE-H TESTING 300 psig (hyd.) WORKING PRESSURE SUITABLE FOR STEAM LINE UP TO MAX. SET PRESSURE 150 psig MAX. WORKING TEMP. 437°F (225°C) MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 STEM BRASS FORGED 2 PIN SS AISI-410 3 CAP ALUMINIUM ——– 4 ADJUSTING SCREW BRONZE BS:1400 LG2 5 CHAMBER BRONZE BS:1400 LG2 6 UPPER SPRING DISC BRONZE BS:1400 LG2 7 SPRING SPRING STEEL BS:1726 EN:47 8 LOWER SPRING DISC BRONZE BS:1400 LG2 9 LEVER CAST IRON BS:1452 Gr220 10 DISC BRONZE BS:1400 LG2 11 REGULATING BOLT & NUT BRASS BS:2872 CZ114 12 REGULATING RING BRONZE BS:1400 LG2 13 BODY BRONZE BS:1400 LG2 14 LOCKING NUT BRONZE BS:1400 LG2 DIMENSIONS IN mm NOMINAL SIZE ∅A ∅D T B H1 H2 15MM 12.7 114.3 10 70 75 121 20MM 19 114.3 10 73 76 147 25MM 25 120.7 12 78 85 147 32MM 32 133.3 12 85 90 164 40MM 38 139.7 13 90 100 164 50MM 50 165.1 13 100 110 230 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANG IN NOTICE

PRODUCT DETAILS HIGH LIFT, INTEGRAL SEAT TYPE. END DETAILS FLANGED TO BS:10 TABLE-H TESTING 300 psig (hyd.) WORKING PRESSURE SUITABLE FOR STEAM LINE UP TO MAX. SET PRESSURE 150 psig MAX. WORKING TEMP. 437°F (225°C) MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 BODY BRONZE BS:1400 LG2 2 REGULATING RING BRONZE BS:1400 LG2 3 HEX. BOL T & NUT BRASS BS: 2874 CZ114 4 DISC BRONZE BS:1400 LG2 5 LEVER C.I BS:1452Gr.220 6 LOWER SPRING DISC BRONZE BS:1400 LG2 7 SPRING CARBON STEEL BS:1726,EN47 8 UPPER SPRING DISC BRONZE BS:1400 LG2 9 CHAMBER BRONZE BS:1400 LG2 10 ADJUSTING SCREW BRONZE BS:1400 LG2 11 CAP ALLUMINIUM —– 12 HINGE PIN STAINLESS STEEL AISI 410 13 STEM BRASS BS: 2874 CZ114 DIMENSIONS IN mm NOMINAL SIZE ∅A B~ C~ ∅D H~ 15 1/2” BSP 58 44 1/2” BSP 132 20 3/4” BSP 75 55 3/4” BSP 147 25 1” BSP 78 55 1” BSP 147 40 1.1/2” BSP 97 68 1.1/2” BSP 163 50 2” BSP 115 77 2” BSP 230 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE

PRODUCT DETAILS HIGH LIFT, INTEGRAL SEAT TYPE. END DETAILS SCREWED MALE ENDS BSP PARALLEL/TAPER THREADS TO BS:21 TESTING 300 psig.(Hyd.) WORKING PRESSURE SUITABLE FOR STEAM LINE UP TO MAX. STEAM LINE UPTO 150psig AND MAX. TEMP. 225° C. (437°F) MATERIALS OF CONSTRUCTION S.NO. PART’S NAME MATERIALS SPECIFICATIONS 1 STEM BRASS BS:2872 CZ114 2 HINGE PIN S.S. AISI-410 3 CAP ALUMINUM —– 4 ADJUSTING SCREW BRONZE BS:1400 LG2 5 CHAMBER BRONZE BS:1400 LG2 6 UPPER SPRING DISC BRONZE BS:1400 LG2 7 SPRING SPRING STEEL BS:1726 EN:47 8 LOWER SPRING DISC BRONZE BS:1400 LG2 9 LEVER CAST IRON BS:1452 Gr220 10 SEAT BRONZE BS:1400 LG2 11 REGULATING BOLT & NUT BRASS BS:2872 CZ114 12 REGULATING RING BRONZE BS:1400 LG2 13 BODY BRONZE BS:1400 LG2 14 LOCKING NUT BRONZE BS:1400 LG2 DIMENSIONS IN mm NOMINAL SIZE ∅B H~ 15mm 1/2” BSP 190 20mm 3/4” BSP 222 25mm 1” BSP 225 40mm 1.1/2″BSP 262 50mm 2″BSP 345 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.

PRODUCT DETAILS HIGH LIFT, INTEGRAL SEAT TYPE. END DETAILS INLET :- SCREWED MALE BSP PARALLEL/TAPER OUTLET:- FEMALE BSP PARALLEL/TAPER TO BS:21 TESTING 300 Psig. HYDRAULIC. WORKING SUITABLE FOR STEAM LINE UPTO MAX. SET PRESSURE 150psig AND MAX. TEMP. 225° C. MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 BODY BRONZE BS:1400 LG2 2 REGULATING RING BRONZE BS:1400 LG2 3 HEX. BOL T & NUT BRASS BS: 2874 CZ114 4 DISC BRONZE BS:1400 LG2 5 LEVER C.I BS:1452Gr.220 6 LOWER SPRING DISC BRONZE BS:1400 LG2 7 SPRING CARBON STEEL BS:1726,EN47 8 UPPER SPRING DISC BRONZE BS:1400 LG2 9 CHAMBER BRONZE BS:1400 LG2 10 ADJUSTING SCREW BRONZE BS:1400 LG2 11 CAP ALLUMINIUM —– 12 HINGE PIN STAINLESS STEEL AISI 410 13 STEM BRASS BS: 2874 CZ114 DIMENSIONS IN mm NOMINAL SIZE ∅A B~ C~ ∅D H~ 15 1/2” BSP 58 44 1/2” BSP 132 20 3/4” BSP 75 55 3/4” BSP 147 25 1” BSP 78 55 1” BSP 147 40 1.1/2” BSP 97 68 1.1/2” BSP 163 50 2” BSP 115 77 2” BSP 230 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.

RODUCT DETAILS SPHERICAL NITRILE BALL , SELF OPERATING, COVERED EXHAUST. END DETAILS MALE SCREWED END BSP TO BS:21 WORKING VERTICAL INSTALLATION IN WATER SEWAGE LINE OF LONG DISTANCE TO ACCUMULATE AIR RESISTANCE. TO GET BEST PERFORMANCE, THIS VALVE TO BE MOUNTED ON HIGH POINTS OF THE LINE, HAVING PERIODIC INTERVALS TO EACH OTHER. TESTING HYDRAULIC. BODY TESTED :- 250 psig. SEAT TESTED :- 150 psig. MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 CAP BRONZE BS:1400, LG2 2 RETAINER BRONZE BS:1400, LG2 3 BODY BRONZE BS:1400, LG2 4 BALL RUBBER NITRILE DIMENSIONS IN mm NOMINAL SIZE A H~ 25mm 1” BSP 110 40mm 1.1/2” BSP 130 50mm 2” BSP 150 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.