ALUMINIUM BUTTERFLY VALVES LOWEST RATES IN MUMBAI AVAILABLE SIZES FROM 40 MM TO 200 MM...

PRODUCT DETAILS SCREWED IN BONNET , INSIDE SCREW, NON RISING STEM, INTEGRAL SEAT & STURDY HAND WHEEL. END DETAILS FLANGED ENDS TO BS:10, TABLE ‘D’ WORKING SUITABLE FOR NON -SHOCK HYDRAULIC LINE TEMP.UPTO 45ºC TESTING (HYD.) BODY TEST PRESSURE :- 300 psig. SEAT TEST PRESSURE :- 200 psig. MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 NUT CARBON STEEL BS:916 2 WASHER CARBON STEEL —– 3 HAND WHEEL CAST IRON BS:1452,Gr220 4 STEM BRASS BS:2872,CZ114 5 GLAND NUT BRONZE BS:1400 LG2 6 GLAND BUSH BRONZE BS:1400 LG2 7 GLAND PACKING ASBESTOS —– 8 BONNET BRONZE BS:1400 LG2 9 WEDGE BRONZE BS:1400 LG2 10 BODY BRONZE BS:1400 LG2 11 STUFFING BOX BRONZE BS:1400 LG2 DIMENSIONS IN mm NOMINAL SIZE ∅B L+1.5 H T ∅D ∅W~ 15mm 15 64 102 6.5 95.3 55 20mm 20 76 115 6.5 101.6 60 25mm 25 86 127 8 114.3 75 32mm 32 89 140 8 120.7 85 40mm 40 106 162 9.5 133.4 100 50mm 50 114 188 9.5 152.4 110 65mm 65 138 220 11 165.1 127 80mm 80 143 249 12.7 184.2 127 100mm 100 179 320 15.8 216 160 125mm 120 230 375 20 254 200 150mm 147 230 425 22 280 210 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOT

ISI MARKED TO IS:778, CL-I PRODUCT DETAILS SCREWED IN BONNET , INSIDE SCREW, NON-RISING STEM ,INTEGRAL SEATING BACK SEAT ARRANGMENT WITH STURDY HAND WHEEL OPERATING. END DETAILS FLANGE ENDS TO BS:4504 PN10/16 OR IS:778 WORKING SUITABLE FOR NON -SHOCK HYDRAULIC LINE TEMP.UPTO 45ºC TESTING (HYD.) BODY TEST PRESSURE :- 1.5 Mpa SEAT TEST PRESSURE :- 1.0 Mpa MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 NUT CARBON STEEL BS:916 2 WASHER CARBON STEEL —– 3 HAND WHEEL CAST IRON BS:1452,Gr200 4 STEM BRASS BS:2872,CZ114 5 GLAND NUT BRONZE BS:1400 LG2 6 GLAND BUSH BRONZE BS:1400 LG2 7 GLAND PACKING ASBESTOS —– 8 STUFFING BOX BRONZEL BS:1400 LG2 9 BONNET BRONZE BS:1400 LG2 10 BODY BRONZE BS:1400,LG2 11 WEDGE BRONZE BS:1400,LG2 DIMENSIONS IN mm NOMINAL SIZE ∅B L+1.5 T ∅D+1.0 H~ ∅W~ 15mm 15 72 6.4 95 102 55 20mm 20 76 6.4 105 115 60 25mm 25 90 8.0 115 129 75 32mm 32 100 8.0 140 140 85 40mm 40 110 9.5 150 162 100 50mm 50 120 11.0 165 188 110 65mm 65 140 13.5 185 220 115 80mm 80 150 13.5 200 249 127 100mm 100 190 16.5 220 320 160 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.

PRODUCT DETAILS REDUCED BORE, BOLTED BONNET,OUTSIDE SCREW & YOKE TYPE , RISING STEM WITH BACKSEAT ARRANGMENT ,STAINLESS STEEL(AISI 410) TRIM,HAND WHEEL OPERATED,CONFORMING TO BS:5352,CLASS-800 END DETAILS SCREWED FEMALE NPT THREADS TO ANSI B1.20.1 OR SOCKET WELDED ENDS AS PER ASME B16.11 TESTING (HYD.) BODY 207 BAR 3000 psig.HYD. BACK SEAT & SEAT 152 BAR 2200 psig. HYD & 6.9 BAR (100 psig. ) AIR. MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 SLEEVE NUT CARBON STEEL BS: 916 2 WASHER CARBON STEEL —– 3 HAND WHEEL C.I BS: 1452 Gr.200 4 YOKE SLEEVE ALUMINUM BRONZE BS: 1400 AB2C 5 SPINDLE S.S. AISI-410 6 EYE BOLTS FORGED CARBON STEEL ASTM A105 7 NUT FOR GLAND CARBON STEEL (HIGH TENSILE) BS: 916 8 GLAND FLANGED FORGED CARBON STEEL ASTM A105 9 GLAND BUSH S.S AISI-410 10 GLAND PACKING GRAPHITED ASBESTOS —– 11 SCREW CARBON STEEL BS: 916 12 WASHER CARBON STEEL —– 13 HEX. BOLT ALLOY STEEL ASTM A194-Gr2H/EN8 14 BODY FORGED CARBON STEEL ASTM A105 15 BONNET FORGED CARBON STEEL ASTM A105 16 GASKET A.SPIRAL WOUND S.S.FILLED AISI-304 17 WEDGE S.S. AISI-410 18 SEAT RING S.S. AISI-410 DIMENSIONS IN mm NOMINAL SIZE A L W~ H~ 15mm 1/2” NPT/SW 80 76 135 20mm 3/4” NPT/SW 88 76 145 25mm 1” NPT/SW 100 86 170 40mm 1.1/2” NPT/SW 147 120 210 50mm 2” NPT/SW 171 120 240 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.

PRODUCT DETAILS FULL BORE, TWO PIECE DESIGN WITH STAINLESS STEEL BALL & BLOW OFF PROOF STEM, TEFLON SEAT & SEAL, LEVER OPERATED. END DETAILS SCREWED FEMALE ENDS BSP TO BS:21 TESTING HYDRAULIC. BODY TEST PRESSURE :- 500 psig SEAT TEST PRESSURE :- 500 psig MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 LEVER CARBON STEEL —– 2 NUT CARBON STEEL BS:916 3 GLAND NUT CARBON STEEL BS:916 4 GLAND PACKING TEFLON PTFE 5 STEM SEAL TEFLON PTFE 6 SEAT TEFLON PTFE 7 BALL S.S. —– 8 BODY CAST IRON BS:1452 Gr.220 9 STEM S.S. AISI-410 10 CONNECTOR CAST IRON BS:1452 Gr.220 DIMENSIONS IN mm NOMINAL SIZE ∅A L+1.5 H1~ D~ 15mm 1/2” BSP 84 62 110 20mm 3/4” BSP 90 68 110 25mm 1”BSP 95 68 132 32mm 1.1/4”BSP 107 100 150 40mm 1.1/2” BSP 120 110 170 50mm 2” BSP 143 115 200 65mm 2.1/2”BSP 160 145 250 80mm 3”BSP 180 150 320 100mm 4”BSP 228 220 400 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.

PRODUCT DETAILS SINGLE FLAP DISC , SWING TYPE CHECK VALVE BODY SEAT FACING NITRILE MOULDED LINER END DETAILS WAFER SHORT ENDS WITH INTEGRALLY MOULDED RUBBER GASKET. SUITABLE FOR INSERTION BETWEEN CLASS-150,BS-10 TABLE ‘D’ & ‘E’ ,BS:4504,PN-10/16 FLANGES. PRESSURE RATING PN-16 ( HYDRAULIC) TESTING (HYD.) BODY – 500 psig. SEAT – 250 psig. MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 HOOK M.S. — 2 BODY S.G.I BS:2789 3 DISC S.G.I / S.S. BS:2789 / AISI 304 4 BODY SEAT RUBBER NITRILE 5 O RING RUBBER HIGH NITRILE 6 CSK BOLTS CARBON STEEL BS: 916 DIMENSIONS IN mm NOMINAL SIZE ∅A B+2 40mm 86 16 50mm 97 16 65mm 110 16 80mm 129 16 100mm 160 16 125mm 192 18 150mm 218 21 200mm 272 22 250mm 330 28 300mm 384 30 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.

PPRODUCT DETAILS BOLTED BONNET, REDUCED BORE , SS (AISI 410) TRIM, CONFORMING TO BS 5352 CLASS 800 END DETAILS SCREWED FEMALE NPT THREADS TO ANSI B1.20.1 OR SOCKET WELDED ENDS AS PER ASME B 16.11 TESTING HYDRAULIC. BODY TESTED:- 207 bar (3000 psig.) SEAT TESTED :- 152 bar (2200 psig.) MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 HEX. BOLT ALLOY STEEL ASTM A219 Gr.2H/EN8 2 BONNET FORGED CARBON STEEL ASTM A-105 3 GASKET SPIRAL WOUND ASBESTOS FILLED S.S (304) 4 BODY SEAT RING S.S. AISI-410 5 SEAT S.S. AISI-410 6 BODY FORGED CARBON STEEL ASTM-A105 DIMENSIONS IN mm NOMINAL SIZE A L H~ 15mm 1/2″ NPT/SW 90 56 20mm 3/4″ NPT/SW 95 60 25mm 1″ NPT/SW 107 70 40MM 1.1/2″ NPT/SW 130 100 50MM 2″ NPT/SW 145 110 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.

PPRODUCT DETAILS BOLTED BONNET, REDUCED BORE , SS (AISI 410) TRIM, CONFORMING TO BS 5352 CLASS 800 END DETAILS SCREWED FEMALE NPT THREADS TO ANSI B1.20.1 OR SOCKET WELDED ENDS AS PER ASME B 16.11 TESTING HYDRAULIC. BODY TESTED:- 207 bar (3000 psig.) SEAT TESTED :- 152 bar (2200 psig.) MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 HEX. BOLT ALLOY STEEL ASTM A219 Gr.2H/EN8 2 BONNET FORGED CARBON STEEL ASTM A-105 3 GASKET SPIRAL WOUND ASBESTOS FILLED S.S (304) 4 BODY SEAT RING S.S. AISI-410 5 SEAT S.S. AISI-410 6 BODY FORGED CARBON STEEL ASTM-A105 DIMENSIONS IN mm NOMINAL SIZE A L H~ 15mm 1/2″ NPT/SW 90 56 20mm 3/4″ NPT/SW 95 60 25mm 1″ NPT/SW 107 70 40MM 1.1/2″ NPT/SW 130 100 50MM 2″ NPT/SW 145 110 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.

PRODUCT DETAILS SCREWED IN BONNET, INTEGRAL SEAT & BRONZE DISC WITH RUBBER O-RING. END DETAILS SCREWED FEMALE ENDS BSP TO BS:21 TESTING (HYD.) BODY TEST PRESSURE :- 300 psig. SEAT TEST PRESSURE :- 200psig. MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 BODY BRONZE BS:1400 LG2 2 DISC BRONZE BS:1400 LG2 3 BONNET BRONZE BS:1400 LG2 4 SEAT O-RING RUBBER HIGH NITRILE DIMENSIONS IN mm NOMINAL SIZE ∅O L(+1.5) H~ 15mm 1/2”BSP 52 45 20mm 3/4”BSP 55 45 25mm 1”BSP 63 50 32mm 1.1/4”BSP 78 60 40mm 1.1/2”BSP 84 67 50mm 2”BSP 98 78 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.