RODUCT DETAILS SPHERICAL NITRILE BALL , SELF OPERATING, COVERED EXHAUST. END DETAILS MALE SCREWED END BSP TO BS:21 WORKING VERTICAL INSTALLATION IN WATER SEWAGE LINE OF LONG DISTANCE TO ACCUMULATE AIR RESISTANCE. TO GET BEST PERFORMANCE, THIS VALVE TO BE MOUNTED ON HIGH POINTS OF THE LINE, HAVING PERIODIC INTERVALS TO EACH OTHER. TESTING HYDRAULIC. BODY TESTED :- 250 psig. SEAT TESTED :- 150 psig. MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 CAP BRONZE BS:1400, LG2 2 RETAINER BRONZE BS:1400, LG2 3 BODY BRONZE BS:1400, LG2 4 BALL RUBBER NITRILE DIMENSIONS IN mm NOMINAL SIZE A H~ 25mm 1” BSP 110 40mm 1.1/2” BSP 130 50mm 2” BSP 150 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.

PRODUCT DETAILS REDUCED BORE, BOLTED BONNET,OUTSIDE SCREW & YOKE TYPE , RISING STEM WITH BACKSEAT ARRANGMENT ,STAINLESS STEEL(AISI 410) TRIM,HAND WHEEL OPERATED,CONFORMING TO BS:5352,CLASS-800 END DETAILS SCREWED FEMALE NPT THREADS TO ANSI B1.20.1 OR SOCKET WELDED ENDS AS PER ASME B16.11 TESTING (HYD.) BODY 207 BAR 3000 psig.HYD. BACK SEAT & SEAT 152 BAR 2200 psig. HYD & 6.9 BAR (100 psig. ) AIR. MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 SLEEVE NUT CARBON STEEL BS: 916 2 WASHER CARBON STEEL —– 3 HAND WHEEL C.I BS: 1452 Gr.200 4 YOKE SLEEVE ALUMINUM BRONZE BS: 1400 AB2C 5 SPINDLE S.S. AISI-410 6 EYE BOLTS FORGED CARBON STEEL ASTM A105 7 NUT FOR GLAND CARBON STEEL (HIGH TENSILE) BS: 916 8 GLAND FLANGED FORGED CARBON STEEL ASTM A105 9 GLAND BUSH S.S AISI-410 10 GLAND PACKING GRAPHITED ASBESTOS —– 11 SCREW CARBON STEEL BS: 916 12 WASHER CARBON STEEL —– 13 HEX. BOLT ALLOY STEEL ASTM A194-Gr2H/EN8 14 BODY FORGED CARBON STEEL ASTM A105 15 BONNET FORGED CARBON STEEL ASTM A105 16 GASKET A.SPIRAL WOUND S.S.FILLED AISI-304 17 WEDGE S.S. AISI-410 18 SEAT RING S.S. AISI-410 DIMENSIONS IN mm NOMINAL SIZE A L W~ H~ 15mm 1/2” NPT/SW 80 76 135 20mm 3/4” NPT/SW 88 76 145 25mm 1” NPT/SW 100 86 170 40mm 1.1/2” NPT/SW 147 120 210 50mm 2” NPT/SW 171 120 240 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.

PRODUCT DETAILS SINGLE FLAP DISC , SWING TYPE CHECK VALVE BODY SEAT FACING NITRILE MOULDED LINER END DETAILS WAFER SHORT ENDS WITH INTEGRALLY MOULDED RUBBER GASKET. SUITABLE FOR INSERTION BETWEEN CLASS-150,BS-10 TABLE ‘D’ & ‘E’ ,BS:4504,PN-10/16 FLANGES. PRESSURE RATING PN-16 ( HYDRAULIC) TESTING (HYD.) BODY – 500 psig. SEAT – 250 psig. MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 HOOK M.S. — 2 BODY S.G.I BS:2789 3 DISC S.G.I / S.S. BS:2789 / AISI 304 4 BODY SEAT RUBBER NITRILE 5 O RING RUBBER HIGH NITRILE 6 CSK BOLTS CARBON STEEL BS: 916 DIMENSIONS IN mm NOMINAL SIZE ∅A B+2 40mm 86 16 50mm 97 16 65mm 110 16 80mm 129 16 100mm 160 16 125mm 192 18 150mm 218 21 200mm 272 22 250mm 330 28 300mm 384 30 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.

PRODUCT DETAILS SCREWED IN BONNET, RENEWABLE- BRONZE SEAT & RING, SOFT SEATING AND SUITABLE FOR HIGH PRESSURE IN PETROL INDUSTRY. END DETAILS SCREWED BSP FEMALE AS BS:21 TESTING (HYD.) HYDRAULIC BODY TESTED:- 500 psig. SEAT TESTED:- 300 psig. MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS style=”color:#c41e02;”SPECIFICATIONS 1 BONNET CAST IRON BS:1452 Gr.220 2 GASKET C.A.F. … 3 BODY CAST IRON BS:1452 Gr.220 4 SEAT BRONZE BS:1400 LG2 5 SEAT FACING RUBBER NITRILE 6 BODY RING BRONZE BS:1400 LG2 7 SPLIT PIN BRASS BS:2872 CZ114 8 WASHER ALLUMINIUM … 9 NUT BRASS BS:2872 CZ114 DIMENSIONS IN mm NOMINAL SIZE ∅ A B~ C~ 40mm 1/2”BSP 78 76 70 50mm 2”BSP 80 88 76 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE

PRODUCT DETAILS SCREWED IN BONNET, INTEGRAL SEAT & BRONZE DISC WITH RUBBER O-RING. END DETAILS SCREWED FEMALE ENDS BSP TO BS:21 TESTING (HYD.) BODY TEST PRESSURE :- 300 psig. SEAT TEST PRESSURE :- 200psig. MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 BODY BRONZE BS:1400 LG2 2 DISC BRONZE BS:1400 LG2 3 BONNET BRONZE BS:1400 LG2 4 SEAT O-RING RUBBER HIGH NITRILE DIMENSIONS IN mm NOMINAL SIZE ∅O L(+1.5) H~ 15mm 1/2”BSP 52 45 20mm 3/4”BSP 55 45 25mm 1”BSP 63 50 32mm 1.1/4”BSP 78 60 40mm 1.1/2”BSP 84 67 50mm 2”BSP 98 78 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.

PRODUCT DETAILS ANGLE TYPE WITH SS(AISI-410)/ MONEL SEAT AND SS STEM. END DETAILS INLET-FLANGED TO BS:10 TABLE ‘F’ OUTLET-FLANGED TO BS:10 TABLE ‘D’ WORKING MAX BOP 150psig AND MAX WORKING TEMP 220° C TESTING (HYD.) 370 Psig. HYDRAULIC. MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 CAP C.I. BS:1452 Gr220 2 COTTER BRONZE BS:1400 LG2 3 LEVER C.I. BS:1452 Gr220 4 LOCKING NUT BRONZE BS:1400 LG2 5 COVER C.I. BS:1452 Gr220 6 BUSH BRONZE BS:1400 LG2 7 ADJUSTING SCREW BRONZE BS:1400 LG2 8 UPPER SPRING DISC C.I. BS:1452 Gr220 9 SPRING CHAMBER C.I. BS:1452 Gr220 10 STEM S.S. AISI-410 11 LOWER SPRING DISC C.I. BS:1452 Gr220 12 BUSH BRONZE BS:1400 LG2 13 GASKET CAF —————- 14 SPRING SPRING STEEL BS: 1726 EN47 15 GASKET CAF —————- 16 DISC S.S. AISI-410 17 DISC NUT BRONZE BS:1400 LG2 18 SCREW AND NUT BRASS BS: 2874 CZ114 19 BODY SEAT RING S.S. AISI-410 20 BODY C.I. BS:1452 Gr220 21 REGULATING RING BRONZE BS:1400 LG2 22 BOLTS AND NUTS CARBON STEEL BS:936 23 STUDS AND NUTS CARBON STEEL BS:936 DIMENSIONS IN mm NOMINAL SIZE ∅A B T ∅D L H~ 25MM 25 108 12.7 120.6 89 455 40MM 38 120.6 15.8 139.7 101.6 525 50MM 50 137.5 137.5 165.1 120.6 580 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.

PRODUCT DETAILS HIGH LIFT, INTEGRAL SEAT TYPE. END DETAILS FLANGED TO BS:10 TABLE-H TESTING 300 psig (hyd.) WORKING PRESSURE SUITABLE FOR STEAM LINE UP TO MAX. SET PRESSURE 150 psig MAX. WORKING TEMP. 437°F (225°C) MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 STEM BRASS FORGED 2 PIN SS AISI-410 3 CAP ALUMINIUM ——– 4 ADJUSTING SCREW BRONZE BS:1400 LG2 5 CHAMBER BRONZE BS:1400 LG2 6 UPPER SPRING DISC BRONZE BS:1400 LG2 7 SPRING SPRING STEEL BS:1726 EN:47 8 LOWER SPRING DISC BRONZE BS:1400 LG2 9 LEVER CAST IRON BS:1452 Gr220 10 DISC BRONZE BS:1400 LG2 11 REGULATING BOLT & NUT BRASS BS:2872 CZ114 12 REGULATING RING BRONZE BS:1400 LG2 13 BODY BRONZE BS:1400 LG2 14 LOCKING NUT BRONZE BS:1400 LG2 DIMENSIONS IN mm NOMINAL SIZE ∅A ∅D T B H1 H2 15MM 12.7 114.3 10 70 75 121 20MM 19 114.3 10 73 76 147 25MM 25 120.7 12 78 85 147 32MM 32 133.3 12 85 90 164 40MM 38 139.7 13 90 100 164 50MM 50 165.1 13 100 110 230 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANG IN NOTICE

PRODUCT DETAILS HIGH LIFT, INTEGRAL SEAT TYPE. END DETAILS FLANGED TO BS:10 TABLE-H TESTING 300 psig (hyd.) WORKING PRESSURE SUITABLE FOR STEAM LINE UP TO MAX. SET PRESSURE 150 psig MAX. WORKING TEMP. 437°F (225°C) MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 BODY BRONZE BS:1400 LG2 2 REGULATING RING BRONZE BS:1400 LG2 3 HEX. BOL T & NUT BRASS BS: 2874 CZ114 4 DISC BRONZE BS:1400 LG2 5 LEVER C.I BS:1452Gr.220 6 LOWER SPRING DISC BRONZE BS:1400 LG2 7 SPRING CARBON STEEL BS:1726,EN47 8 UPPER SPRING DISC BRONZE BS:1400 LG2 9 CHAMBER BRONZE BS:1400 LG2 10 ADJUSTING SCREW BRONZE BS:1400 LG2 11 CAP ALLUMINIUM —– 12 HINGE PIN STAINLESS STEEL AISI 410 13 STEM BRASS BS: 2874 CZ114 DIMENSIONS IN mm NOMINAL SIZE ∅A B~ C~ ∅D H~ 15 1/2” BSP 58 44 1/2” BSP 132 20 3/4” BSP 75 55 3/4” BSP 147 25 1” BSP 78 55 1” BSP 147 40 1.1/2” BSP 97 68 1.1/2” BSP 163 50 2” BSP 115 77 2” BSP 230 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE

PRODUCT DETAILS HIGH LIFT, INTEGRAL SEAT TYPE. END DETAILS SCREWED MALE ENDS BSP PARALLEL/TAPER THREADS TO BS:21 TESTING 300 psig.(Hyd.) WORKING PRESSURE SUITABLE FOR STEAM LINE UP TO MAX. STEAM LINE UPTO 150psig AND MAX. TEMP. 225° C. (437°F) MATERIALS OF CONSTRUCTION S.NO. PART’S NAME MATERIALS SPECIFICATIONS 1 STEM BRASS BS:2872 CZ114 2 HINGE PIN S.S. AISI-410 3 CAP ALUMINUM —– 4 ADJUSTING SCREW BRONZE BS:1400 LG2 5 CHAMBER BRONZE BS:1400 LG2 6 UPPER SPRING DISC BRONZE BS:1400 LG2 7 SPRING SPRING STEEL BS:1726 EN:47 8 LOWER SPRING DISC BRONZE BS:1400 LG2 9 LEVER CAST IRON BS:1452 Gr220 10 SEAT BRONZE BS:1400 LG2 11 REGULATING BOLT & NUT BRASS BS:2872 CZ114 12 REGULATING RING BRONZE BS:1400 LG2 13 BODY BRONZE BS:1400 LG2 14 LOCKING NUT BRONZE BS:1400 LG2 DIMENSIONS IN mm NOMINAL SIZE ∅B H~ 15mm 1/2” BSP 190 20mm 3/4” BSP 222 25mm 1” BSP 225 40mm 1.1/2″BSP 262 50mm 2″BSP 345 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.