ALUMINIUM BUTTERFLY VALVES LOWEST RATES IN MUMBAI AVAILABLE SIZES FROM 40 MM TO 200 MM...

PRODUCT DETAILS FLAP TYPE DOUBLE DISC , SPRING LOADED SWING TYPE CHECK VALVE BODY SEAT FACING NITRILE MOULDED LINER DISC SEAT FACING S.S./ SGI INTEGRAL FACE END DETAILS SUITABLE FOR INSERTION BETWEEN CLASS-150,BS-10 TABLE D/E , BS:4504,PN:10/16 FLANGES PRESSURE RATING PN-16 ( HYDRAULIC) TESTING (HYD.) BODY – 500 psig. SEAT – 250 psig. MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 BODY CAST IRON BS:1452 Gr.220 2 DISC S.S./ S.G.I. AISI 304 / BS:2789 3 SEAT RING RUBBER NITRILE 4 SPRING S.S AISI 304 5 HINGE PIN S.S AISI 304 6 STOP PIN S.S AISI 304 7 BEARING TEFLON P.T.F.E. 8 PLUG/GRUB SCREW CARBON STEEL BS: 916 9 NAME PLATE ALUMINIUM … NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.

PRODUCT DETAILS SINGLE FLAP DISC , SWING TYPE CHECK VALVE BODY SEAT FACING NITRILE MOULDED LINER END DETAILS WAFER SHORT ENDS WITH INTEGRALLY MOULDED RUBBER GASKET. SUITABLE FOR INSERTION BETWEEN CLASS-150,BS-10 TABLE ‘D’ & ‘E’ ,BS:4504,PN-10/16 FLANGES. PRESSURE RATING PN-16 ( HYDRAULIC) TESTING (HYD.) BODY – 500 psig. SEAT – 250 psig. MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 HOOK M.S. — 2 BODY S.G.I BS:2789 3 DISC S.G.I / S.S. BS:2789 / AISI 304 4 BODY SEAT RUBBER NITRILE 5 O RING RUBBER HIGH NITRILE 6 CSK BOLTS CARBON STEEL BS: 916 DIMENSIONS IN mm NOMINAL SIZE ∅A B+2 40mm 86 16 50mm 97 16 65mm 110 16 80mm 129 16 100mm 160 16 125mm 192 18 150mm 218 21 200mm 272 22 250mm 330 28 300mm 384 30 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.

PPRODUCT DETAILS BOLTED BONNET, REDUCED BORE , SS (AISI 410) TRIM, CONFORMING TO BS 5352 CLASS 800 END DETAILS SCREWED FEMALE NPT THREADS TO ANSI B1.20.1 OR SOCKET WELDED ENDS AS PER ASME B 16.11 TESTING HYDRAULIC. BODY TESTED:- 207 bar (3000 psig.) SEAT TESTED :- 152 bar (2200 psig.) MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 HEX. BOLT ALLOY STEEL ASTM A219 Gr.2H/EN8 2 BONNET FORGED CARBON STEEL ASTM A-105 3 GASKET SPIRAL WOUND ASBESTOS FILLED S.S (304) 4 BODY SEAT RING S.S. AISI-410 5 SEAT S.S. AISI-410 6 BODY FORGED CARBON STEEL ASTM-A105 DIMENSIONS IN mm NOMINAL SIZE A L H~ 15mm 1/2″ NPT/SW 90 56 20mm 3/4″ NPT/SW 95 60 25mm 1″ NPT/SW 107 70 40MM 1.1/2″ NPT/SW 130 100 50MM 2″ NPT/SW 145 110 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.

PPRODUCT DETAILS BOLTED BONNET, REDUCED BORE , SS (AISI 410) TRIM, CONFORMING TO BS 5352 CLASS 800 END DETAILS SCREWED FEMALE NPT THREADS TO ANSI B1.20.1 OR SOCKET WELDED ENDS AS PER ASME B 16.11 TESTING HYDRAULIC. BODY TESTED:- 207 bar (3000 psig.) SEAT TESTED :- 152 bar (2200 psig.) MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 HEX. BOLT ALLOY STEEL ASTM A219 Gr.2H/EN8 2 BONNET FORGED CARBON STEEL ASTM A-105 3 GASKET SPIRAL WOUND ASBESTOS FILLED S.S (304) 4 BODY SEAT RING S.S. AISI-410 5 SEAT S.S. AISI-410 6 BODY FORGED CARBON STEEL ASTM-A105 DIMENSIONS IN mm NOMINAL SIZE A L H~ 15mm 1/2″ NPT/SW 90 56 20mm 3/4″ NPT/SW 95 60 25mm 1″ NPT/SW 107 70 40MM 1.1/2″ NPT/SW 130 100 50MM 2″ NPT/SW 145 110 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.

PRODUCT DETAILS RIGHT ANGLE PATTERN, BOLTED COVER, RENEWABLE STAINLESS STEEL TRIM. END DETAILS FLANGED TO DIN 2533 RF, PN16 FOR SIZE UP TO 150mm FLANGED TO DIN 2532 RF, PN10 FOR SIZE 200mm WORKING PRESSURE SUITABLE FOR STEAM LINE NOMINAL PRESSURE RATING PN-16/10, CONFORMING TO BS:5153 TESTING HYDRAULIC. TEST PRESSURE:- 26Bar (377 psig. hyd.) For size up to 150mm TEST PRESSURE:- 16Bar ( 232 psig. hyd. ) For size above 150mm MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 STUDS AND NUTS CARBON STEEL BS: 916 2 COVER CAST IRON BS:1452 GR.220 3 GASKET C.A.F. … 4 DISC STAINLESS STEEL AISI-410 5 BODY SEAT RING STAINLESS STEEL AISI-410 6 BODY CAST IRON BS:1452 GR.220 DIMENSIONS IN mm NOMINAL SIZE ∅D ∅E ∅F T B L* H~ 15mm 15 45 95 14 2 90 60 20mm 20 58 105 16 2 95 60 25mm 25 68 115 16 2 100 68 32mm 32 78 140 18 2 105 70 40mm 40 88 150 18 3 115 75 50mm 50 102 165 20 3 125 80 65mm 65 122 185 20 3 145 96 80mm 80 138 200 22 3 155 102 100mm 100 158 220 24 3 175 112 125mm 125 188 250 26 3 200 128 150mm 150 212 285 26 3 225 148 200mm 200 268 340 26 3 275 178 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE

PRODUCT DETAILS REDUCED BORE, BOLTED BONNET,OUTSIDE SCREW & YOKE TYPE , RISING STEM WITH BACKSEAT ARRANGMENT ,STAINLESS STEEL(AISI 410) TRIM,HAND WHEEL OPERATED,CONFORMING TO BS:5352,CLASS-800 END DETAILS SCREWED FEMALE NPT THREADS TO ANSI B1.20.1 OR SOCKET WELDED ENDS AS PER ASME B16.11 TESTING (HYD.) BODY 207 BAR 3000 psig.HYD. BACK SEAT & SEAT 152 BAR 2200 psig. HYD & 6.9 BAR (100 psig. ) AIR. MATERIALS OF CONSTRUCTION PART NO. PART’S NAME MATERIALS SPECIFICATIONS 1 SLEEVE NUT CARBON STEEL BS: 916 2 WASHER CARBON STEEL —– 3 HAND WHEEL C.I BS: 1452 Gr.200 4 YOKE SLEEVE ALUMINUM BRONZE BS: 1400 AB2C 5 SPINDLE S.S. AISI-410 6 EYE BOLTS FORGED CARBON STEEL ASTM A105 7 NUT FOR GLAND CARBON STEEL (HIGH TENSILE) BS: 916 8 GLAND FLANGED FORGED CARBON STEEL ASTM A105 9 GLAND BUSH S.S AISI-410 10 GLAND PACKING GRAPHITED ASBESTOS —– 11 SCREW CARBON STEEL BS: 916 12 WASHER CARBON STEEL —– 13 HEX. BOLT ALLOY STEEL ASTM A194-Gr2H/EN8 14 BODY FORGED CARBON STEEL ASTM A105 15 BONNET FORGED CARBON STEEL ASTM A105 16 GASKET A.SPIRAL WOUND S.S.FILLED AISI-304 17 WEDGE S.S. AISI-410 18 SEAT RING S.S. AISI-410 DIMENSIONS IN mm NOMINAL SIZE A L W~ H~ 15mm 1/2” NPT/SW 80 76 135 20mm 3/4” NPT/SW 88 76 145 25mm 1” NPT/SW 100 86 170 40mm 1.1/2” NPT/SW 147 120 210 50mm 2” NPT/SW 171 120 240 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.

PRODUCT DETAILS BOLTED BONNET,OUTSIDE SCREW & YOKE TYPE,RISING STEM WITH BACK SEAT ARRANGEMENT,RENWABLE S.S./MONEL TRIM, WITH STRAIGHT INLET HAND WHEEL OPERATED END DETAILS FLANGED ENDS AS PER BS:10 TABLE ‘J’ WORKING PRESSURE TESTING 700 psig.(Hyd.) MATERIALS OF CONSTRUCTION S NO. PART’S NAME MATERIALS SPECIFICATIONS 1 NUT CARBON STEEL BS:916 2 WASHER CARBON STEEL … 3 HAND WHEEL C.I. BS:1452 Gr220 4 STEM S.S. AISI-410 5 LOCKING SCREW CARBON STEEL BS:916 6 YOKE BUSH ALUMINIUM BRZ. BS:1400 AB1C 7 STUD & NUT CARBON STEEL BS:916 8 GLAND FLANGE CAST STEEL ASTM A216 Gr.WCB 9 GLAND S.S. AISI-410 10 BONNET CAST STEEL ASTM A216 Gr.WCB 11 GLAND PACKING GRAPHITED ASBESTOS … 12 STUDS & NUTS CARBON STEEL BS:916 13 BACK SEAT BUSH S.S. AISI-410 14 GASKET STEAM JOINTING … 15 DISC NUT S.S. AISI-410 16 DISC S.S. AISI-410 17 BODY SEAT RING S.S. AISI-410 18 GUIDE S.S. AISI-410 19 BODY CAST STEEL ASTM A216 Gr.WCB 20 CHECK VALVE DISC S.S. AISI-410 21 STUDS & NUTS CARBON STEEL BS:916 22 STRAIGHT INLET CAST STEEL ASTM A216 Gr.WCB DIMENSIONS IN mm NOMINAL SIZE ∅F L+1.5 T H1~ H2~ 25mm 120.6 100 13 220 155 40mm 133.3 105 16 240 185 50mm 139.7 110 16 260 190 65mm 165.1 125 20 280 195 80mm 368.3 145 20 320 240 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.

PRODUCT DETAILS BOLTED BONNET,OUTSIDE SCREW & YOKE TYPE, RISING STEM, STRAIGHT INLET, RENEWABLE TRIMS, BACKSEAT ARRANGEMENT WITH HANDWHEEL OPERATED. END DETAILS FLANGED ENDS AS PER BS:10 TABLE ‘F’ WORKING PRESSURE SUITABLE MAX. BOP 150 psig.MAX.WORKING TESTING 300 psig. (Hyd.) MATERIALS OF CONSTRUCTION S NO. PART’S NAME MATERIALS SPECIFICATIONS 1 NUT CARBON STEEL BS:916 2 WASHER CARBON STEEL … 3 HAND WHEEL C.I. BS:1452 Gr220 4 STEM S.S. AISI-410 5 BUSH S.S. AISI-410 6 GLAND C.I. BS:1452 Gr220 7 GLAND PACKING ASBESTOS … 8 BONNET C.I. BS:1452 Gr220 9 GASKET CAF … 10 DISC NUT S.S. AISI-410 11 SCREW S.S. AISI-410 12 DISC S.S. AISI-410 13 BODY SEAT RING S.S. AISI-410 14 BODY C.I. BS:1452 Gr220 15 STUD & NUT CARBON STEEL BS:916 16 T-HEAD BOLT & NUT CARBON STEEL BS:916 17 STOPPER BRONZE BS:1400 LG2 18 GASKET CAF … 19 CHECK DISC S.S. AISI-410 20 STRAIGHT INLET C.I. BS:1452 Gr220 DIMENSIONS IN mm NOMINAL SIZE ∅A ∅B L+1 T H1~ H2~ 25mm 25 122 100 13 220 155 32mm 32 134 105 16 240 185 40mm 40 140 110 16 260 190 50mm 50 165 125 20 280 195 65mm 65 184 145 20 310 240 NOTE:- DUE TO CONTINOUS DEVELOPMENT PROGRAMME, DESIGN & DATA IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE.